Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Coolant Capacity & Type

    2016 Honda Accord: Coolant Capacity & Type

    Everything on this vehicle

    Working on this 2016 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    A 2016 Honda Accord's cooling system holds between 6.0 and 7.5 quarts (5.7 to 7.1 liters) of coolant, depending on the engine option. Keeping the coolant fresh and at the proper level is critical for the health of your Accord's engine, preventing both overheating and corrosion.

    Quick Answer

    • Total Capacity (approximate):
      • 2.4L 4-Cylinder: 6.0 quarts (5.7 Liters)
      • 3.5L V6: 7.5 quarts (7.1 Liters)
    • OEM Coolant Specification: Honda Long Life Antifreeze/Coolant Type 2
    • Color: Blue
    • Chemistry: Phosphate-based Organic Acid Technology (P-OAT). It is silicate-free and borate-free.
    • Mix Ratio: Pre-mixed 50/50 with deionized water. Do not add water.

    Capacity by Engine Option

    The total cooling system capacity varies slightly based on the engine installed in your 2016 Accord. These values represent the total capacity after a complete engine overhaul. A simple drain-and-fill will use slightly less fluid.

    EngineTransmissionTotal Capacity (Quarts)Total Capacity (Liters)
    2.4L 4-CylinderCVT / Manual6.0 quarts5.7 Liters
    3.5L V6Automatic7.5 quarts7.1 Liters

    It is essential to use the correct Honda Type 2 coolant. While other "Asian vehicle" coolants may claim compatibility, Honda's specific P-OAT formulation is designed to protect the metals and seals used in their cooling systems. Using incorrect coolant can lead to premature water pump failure, seal degradation, and corrosion in the radiator and heater core.

    Flush Interval

    Following the factory-recommended service interval is the best way to ensure a long service life for your cooling system components.

    • Initial Flush: The first coolant change is recommended at 10 years or 120,000 miles, whichever comes first.
    • Subsequent Flushes: After the initial service, the interval is shortened to every 5 years or 60,000 miles.

    There is no specific "severe duty" schedule for coolant changes, but if the vehicle is frequently used for towing, driven in mountainous terrain, or in extreme temperatures, adhering strictly to the 60,000-mile interval is highly advised.

    How to Refill & Bleed

    Air pockets trapped in the cooling system after a refill are the number one cause of post-service overheating issues. Honda Accords of this generation can be particularly sensitive to trapped air. Using the proper technique is crucial.

    1. Drain: With the engine cool, place a large drain pan under the radiator and loosen the petcock at the bottom to drain the old coolant.
    2. Refill: Tighten the petcock. We strongly recommend using a spill-free funnel kit that locks onto the radiator neck. Slowly pour the Honda Type 2 coolant into the funnel until the radiator is full.
    3. Bleed Air: Start the engine and turn the cabin heater on to the highest temperature setting with the fan on low. Let the engine idle. You will see air bubbles coming up through the coolant in the funnel. Continue to let the engine run, adding small amounts of coolant to the funnel as the level drops, until the bubbles stop and the engine's cooling fans have cycled on and off at least twice.
    4. Finalize: Squeeze the upper radiator hose to burp out any remaining air pockets. Shut the engine off and let it cool completely. Remove the funnel, top off the radiator if needed, and secure the radiator cap. Fill the coolant reservoir (overflow tank) to the "MAX" line.

    Common Cooling System Issues

    The 9th generation Honda Accord (2013-2017) has a reliable cooling system, but a few items can fail with age and miles:

    • Water Pumps (V6): The water pump on the 3.5L V6 engine is driven by the timing belt. They can sometimes begin to weep coolant as they approach the 100,000-mile mark. It is standard practice to replace the water pump whenever the timing belt is replaced.
    • Sticking Thermostats: A thermostat that fails in the closed position will cause rapid overheating. If it fails in the open position, the engine will be slow to warm up and may throw a check engine light (P0128 - Coolant Temperature Below Thermostat Regulating Temperature).
    • Radiator Fan Motors: Fan motor failures can lead to overheating, especially in stop-and-go traffic.

    By using the correct fluid and following the proper service procedures, you can expect a long and trouble-free life from your 2016 Accord's cooling system.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2016 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email