Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2016 Honda Accord Brake Pad & Rotor Specs

    Everything on this vehicle

    Working on this 2016 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2016 Honda Accord

    Caliper bracket torque
    80 lb-ft (108 Nm)
    Caliper slide-pin torque
    25 lb-ft (34 Nm)

    From the table below. Confirm with your owner's manual for your exact engine.

    Quick reference

    SpecFrontRear
    Pad PN (OEM)Verify with dealerVerify with dealer
    Pad PN (Akebono)ACT1654ACT1324
    Pad PN (BoschQuietCast)BC1654BC1324
    Pad PN (Wagner OEX)OEX1654OEX1324
    Pad PN (Power Stop)16-1654 (Z16 Evolution Ceramic)16-1324 (Z16 Evolution Ceramic)
    Rotor diameter11.1 in (282 mm) - LX/Sport/EX/EX-L 4-cyl<br>11.8 in (300 mm) - EX-L V6/Touring10.2 in (259 mm) - LX/Sport/EX/EX-L 4-cyl<br>11.1 in (282 mm) - EX-L V6/Touring
    Rotor new thickness0.984 in (25.0 mm) - LX/Sport/EX/EX-L 4-cyl<br>1.102 in (28.0 mm) - EX-L V6/Touring0.394 in (10.0 mm) - LX/Sport/EX/EX-L 4-cyl<br>0.433 in (11.0 mm) - EX-L V6/Touring
    Rotor minimum thickness0.906 in (23.0 mm) - LX/Sport/EX/EX-L 4-cyl<br>1.024 in (26.0 mm) - EX-L V6/Touring0.335 in (8.5 mm) - LX/Sport/EX/EX-L 4-cyl<br>0.374 in (9.5 mm) - EX-L V6/Touring
    Caliper piston count11
    Caliper bracket torque80 lb-ft (108 Nm)54 lb-ft (74 Nm)
    Caliper slide-pin torque25 lb-ft (34 Nm)17 lb-ft (23 Nm)
    Brake fluid specDOT3 or DOT4DOT3 or DOT4

    How to choose pads

    When it comes to replacing the brake pads on your 2016 Honda Accord, you'll typically encounter three main material types: ceramic, semi-metallic, and heavy-duty (HD).

    • Ceramic pads are a popular choice for their quiet operation, low dust production, and smooth braking feel. They excel in normal driving conditions and are an excellent option for daily drivers who prioritize comfort and cleanliness. Akebono ACT (Akebono Ceramic Technology) series pads are a prime example.

    • Semi-metallic pads offer a more aggressive bite and better heat dissipation, making them a good choice for drivers who occasionally encounter spirited driving or stop-and-go traffic. They tend to produce more dust and can be a bit noisier than ceramic pads, but their performance in demanding situations is often superior. Bosch QuietCast pads are a good semi-metallic option.

    • Heavy-duty (HD) pads are designed for more extreme conditions, such as towing (though less common for an Accord) or sustained aggressive driving. These pads generally offer the highest friction and heat resistance but come with trade-offs like increased noise, dust, and potentially faster rotor wear. Power Stop's Z23 Evolution Sport Carbon-Fiber Ceramic pads (not listed above, but an example of a more performance-oriented pad within their line) would fall into this category, offering enhanced performance over their standard Z16 line. For a daily driven Accord, HD pads are typically overkill. The Z16 Evolution Ceramic pads listed in the Quick Reference are a great choice for combining performance and daily drivability.

    For most 2016 Honda Accord owners, good quality ceramic pads will provide excellent performance, quiet operation, and minimal dust.

    Typical service life

    The service life of brake components on your 2016 Honda Accord can vary significantly based on your driving style, local topography, and maintenance habits. Generally:

    • Front brake pads typically last between 30,000 to 70,000 miles. Front brakes do about 70% of the stopping work.
    • Rear brake pads typically last longer, often between 50,000 to 90,000 miles.
    • Brake rotors usually need replacement every one to two pad changes, or approximately 60,000 to 100,000 miles. Rotors can sometimes be resurfaced if they are above the minimum thickness specification and have no significant cracks or scoring. However, many technicians recommend replacing rotors with pads for optimal performance.

    A "pad-slap interval" (simply replacing pads without touching rotors) is generally not recommended as a standalone service. While it might save money in the short term, it can lead to premature wear of the new pads, increased noise, and reduced braking performance due to uneven rotor surfaces. If rotors aren't replaced or machined, at a minimum, you should always thoroughly clean and lubricate the caliper slide pins and hardware.

    Common brake issues for this generation

    The 2016 Honda Accord is generally known for reliable brakes, but some common issues that can arise for this generation or any vehicle of similar age include:

    • Uneven pad wear: This can be caused by seized caliper slide pins, a sticking caliper piston, or improper installation. Regular lubrication of slide pins during service can help prevent this.
    • Brake pulsation/vibration: Often felt through the steering wheel or brake pedal, this is usually indicative of warped brake rotors. While technically rotors don't "warp" in the traditional sense, uneven heat distribution and material transfer can lead to thickness variations that cause pulsation.
    • Noise (squealing, grinding): Squealing can indicate worn-out pads (especially if the wear indicators are exposed), glazed pads, or a lack of proper lubrication during installation. Grinding is a more serious sound, often meaning metal-on-metal contact, indicating severely worn pads that need immediate replacement.
    • Spongy brake pedal: This can point to air in the hydraulic system, a failing master cylinder, or a leak. This requires prompt diagnosis and repair.
    • Sticky parking brake: On models with a manual parking brake, the cables can sometimes seize or become stiff over time, leading to the rear brakes dragging.

    Brake job cost estimate

    The cost of a brake job for your 2016 Honda Accord can vary significantly based on your location, the shop you choose, and the quality of parts. These are rough estimates for parts and labor per axle:

    • Front brake job (pads and rotors): $350 - $600
    • Rear brake job (pads and rotors): $300 - $550

    These estimates do not include additional services like caliper replacement, brake fluid flush, or addressing other underlying issues. Always get a detailed quote from your chosen repair facility.

    Find a trusted brake shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2016 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email