Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2017 Jeep Cherokee Oil Capacity & Filter

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2017 Jeep Cherokee? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2017 Jeep Cherokee takes between 5.0 and 6.0 quarts of engine oil, depending on the engine.

    Quick answer

    • 2.4L Tigershark MultiAir I-4 engine:

      • Capacity: 5.0 US Quarts (4.7 Liters)
      • Viscosity: 5W-20
      • Oil Spec: FCA US Material Standard MS-6395 (e.g., API SN Plus, ILSAC GF-5)
      • OEM Oil Filter: Mopar 05081292AA
      • Aftermarket Oil Filter Cross-references:
        • Fram: CH11665
        • Wix: WL10010
        • Mobil 1: M1C-251A
    • 3.2L Pentastar V6 engine:

      • Capacity: 6.0 US Quarts (5.7 Liters)
      • Viscosity: 5W-20
      • Oil Spec: FCA US Material Standard MS-6395 (e.g., API SN Plus, ILSAC GF-5)
      • OEM Oil Filter: Mopar 05081292AA
      • Aftermarket Oil Filter Cross-references:
        • Fram: CH11665
        • Wix: WL10010
        • Mobil 1: M1C-251A

    Capacity by engine option

    EngineCapacity (US Quarts)Capacity (Liters)
    2.4L Tigershark MultiAir I-45.04.7
    3.2L Pentastar V66.05.7

    Oil change interval

    Jeep recommends an oil change interval for the 2017 Cherokee based on your vehicle's Oil Change Indicator System. However, general guidelines are:

    • Normal Duty: Every 10,000 miles (16,000 km) or 12 months, whichever comes first.
    • Severe Duty: Every 5,000 miles (8,000 km) or 6 months, whichever comes first. Severe duty conditions include frequent short trips, extreme temperatures, dusty conditions, towing, or extensive idling.

    Always refer to your owner's manual for the most accurate and personalized recommendations.

    Drain plug torque

    The drain plug torque for both the 2.4L and 3.2L engines in the 2017 Jeep Cherokee is 20 ft-lbs (27 Nm). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The proper crush washer size for the 2017 Jeep Cherokee is 12mm.

    How to change the oil

    1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, making it flow more easily.
    2. Lift and secure: Park on a level surface, engage the parking brake, and safely lift the front of the vehicle using a jack and jack stands.
    3. Locate drain plug: Place a suitable drain pan beneath the oil pan. Remove the drain plug with a wrench (typically 13mm or 1/2 inch, consult your specific vehicle as it may vary slightly), allowing the old oil to drain completely.
    4. Replace drain plug: Once drained, reinstall the drain plug with a new crush washer and torque to 20 ft-lbs.
    5. Remove oil filter: Locate the oil filter (cartridge type for both engines). Unscrew the oil filter housing cap using an appropriate wrench or socket. Remove the old filter element and O-rings.
    6. Install new filter: Lubricate new O-rings with fresh oil and place them in the correct grooves. Insert the new filter element into the housing. Tighten the oil filter cap by hand until snug, then tighten to the specified torque (often around 18 ft-lbs for the cap).
    7. Add new oil: Lower the vehicle. Remove the oil filler cap and carefully add the recommended amount and type of new oil.
    8. Check oil level: Start the engine and let it run for a few minutes. Turn it off, wait several minutes for the oil to settle, then check the dipstick and top off if necessary.
    9. Reset oil life monitor: Consult your owner's manual for instructions on how to reset the oil change indicator.

    Common issues / tips

    • Oil Filter Housing Leaks (3.2L Pentastar): A known issue in some Pentastar V6 engines is oil leaks from the oil filter housing assembly. This is often due to degraded O-rings or a cracked housing. If you notice oil leaking in the valley of the engine, this could be the culprit.
    • Tigershark Oil Consumption (2.4L): Some 2.4L Tigershark engines have been reported to consume oil. It's crucial to regularly check your oil level between changes, especially if you drive a 2.4L model, and keep an eye out for warning lights.
    • Correct Filter Type: The 2017 Jeep Cherokee (both engines) uses a cartridge-style oil filter, not a spin-on type. Ensure you have the correct replacement.
    • MS-6395 Spec: Always use an oil that meets or exceeds the FCA US Material Standard MS-6395 specification. This ensures proper lubrication and engine protection as designed by the manufacturer.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Jeep Cherokee?

    Request service from shops in your area.

    More specs for the 2017 Jeep Cherokee

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email