2015 Toyota Camry: Oil Capacity & Filter Specs

The 2015 Toyota Camry takes between 4.7 and 4.9 quarts of 0W-20 engine oil, depending on the engine. This guide provides a comprehensive overview of oil capacity, recommended oil types, filter part numbers, and maintenance tips for your 2015 Camry.

Quick Answer

• Total Oil Capacity:
  • 2.5L 4-cylinder (2AR-FE): 4.6 US Quarts (4.4 Liters) with filter
  • 3.5L V6 (2GR-FE): 6.4 US Quarts (6.1 Liters) with filter
• Recommended Oil Weight: 0W-20 synthetic motor oil
• Oil Specification: API SN or ILSAC GF-5 (or newer equivalents like API SP / ILSAC GF-6A)
• Oil Filter Part Numbers:
  • OEM: Toyota Genuine Part #90915-YZZF2 (for 2.5L and 3.5L engines)
  • Fram: PH4967 (for 2.5L and 3.5L engines)
  • Wix: 57065 (for 2.5L and 3.5L engines)
  • Mobil 1: M1-103 (for 2.5L and 3.5L engines)

Capacity by Engine Option

Oil Change Interval

Toyota recommends different oil change intervals based on driving conditions:

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first. This applies to vehicles primarily driven in ideal conditions.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. This applies if you frequently drive in conditions such as:
  • Towing or carrying heavy loads
  • Driving in extremely cold weather or dusty conditions
  • Extensive idling or stop-and-go driving
  • Repeated short trips (less than 5 miles)

For optimal engine longevity, many technicians and enthusiasts recommend adhering to the severe duty interval, especially as the vehicle ages.

Drain Plug Torque

The oil drain plug on the 2015 Toyota Camry should be torqued to 30 ft-lbs (41 Nm). Always use a new crush washer with every oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is 90430-12031.

How to Change the Oil

Performing an oil change on your 2015 Camry is a straightforward process:

1. Warm up the engine: Drive the car for 5-10 minutes to allow the oil to reach operating temperature, ensuring it drains more easily.
2. Lift and secure: Safely lift the front of the vehicle using a jack and support it with jack stands.
3. Locate and drain: Place a drain pan under the oil pan. Loosen and remove the drain plug with a wrench and allow the old oil to drain completely.
4. Replace filter: Locate the oil filter (cartridge type on the 2.5L, canister type on the 3.5L). Use an oil filter wrench to remove it. Lubricate the new filter's O-rings with fresh oil and install it, tightening by hand until snug, then an additional 1/4 to 1/2 turn.
5. Reinstall drain plug: Install a new crush washer on the drain plug and tighten it to 30 ft-lbs (41 Nm).
6. Refill with new oil: Lower the vehicle. Remove the oil filler cap and carefully pour in the recommended amount of fresh 0W-20 synthetic oil.
7. Check level: Start the engine and let it run for a minute to circulate the new oil. Turn off the engine, wait a few minutes, then check the oil level with the dipstick. Add more oil if necessary.
8. Dispose of old oil: Properly dispose of used engine oil at a certified recycling center.

Common Issues / Tips

• Cartridge Filter Housing (2.5L): The 2.5L 4-cylinder engine uses a cartridge-style oil filter located in a plastic housing. Be careful not to overtighten the housing, as it can crack. A specific oil filter wrench socket is highly recommended for removal and installation. Ensure the new O-rings are correctly seated.
• Oil Consumption (2.5L): Some 2015 Camrys with the 2.5L engine may exhibit higher-than-average oil consumption. Regularly monitor your oil level between changes, especially if you notice a drop. Consult your dealer if consumption is excessive.
• Synthetic Oil: The 2015 Camry is designed for 0W-20 synthetic oil. Using conventional oil or a different weight can negatively impact fuel economy and engine longevity.
• Regular Checks: Periodically check your oil level on a flat surface when the engine is cool. This will help you catch any potential leaks or consumption issues early.

Need an oil change? Find a trusted shop on Repairius.