Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    A/C Refrigerant & Oil

    2020 Honda Accord A/C Refrigerant & Oil Capacity

    Everything on this vehicle

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Refrigerant Type: R-1234yf
    • Full System Charge: 14.1 - 15.9 oz (400 - 450 grams) - Always check your specific vehicle decal.
    • PAG Oil Type: PAG 46
    • PAG Oil Amount: 4.41 - 5.07 oz (130 - 150 mL)
    • Low-Side Service Port: On the larger diameter A/C line, typically located near the firewall on the passenger side.
    • High-Side Service Port: On the smaller diameter A/C line, typically located near the condenser or passenger side of the engine bay.

    Why R-1234yf Matters

    Your 2020 Honda Accord uses R-1234yf refrigerant, a necessary transition from the older R-134a. This change was mandated due to R-1234yf's significantly lower Global Warming Potential (GWP), meaning it has a much smaller impact on climate change if released into the atmosphere. While environmentally friendlier, it comes with a few considerations:

    • Cost: R-1234yf is generally more expensive than R-134a.
    • EPA Regulations: Strict EPA regulations govern the handling and disposal of R-1234yf. Specialized equipment is required for recovery and recycling.
    • Recovery Machine Requirements: Due to its mild flammability, dedicated R-1234yf recovery, recycling, and recharging machines are necessary. These machines are designed with safety features to prevent ignition and cross-contamination.

    Recharge Procedure

    Recharging your 2020 Honda Accord's A/C system requires precision. Here's a high-level overview, but always consult the factory service manual for detailed instructions and safety precautions.

    1. Evacuation is Key: Before adding any new refrigerant, the system must be thoroughly evacuated. This process removes all air and moisture from the A/C system, which are detrimental to its performance and longevity. Moisture can combine with refrigerant to form corrosive acids, leading to component failure.
    2. Proper Charge by Weight: Do NOT rely on pressure readings alone. The only accurate way to charge an A/C system is by weight, using a dedicated charging machine or scale. Overcharging or undercharging can both lead to poor cooling performance and potential damage to the compressor.
    3. Vacuum Hold Test: After evacuation, a vacuum hold test should be performed to ensure there are no leaks in the system. A system that doesn't hold a vacuum will simply leak out any new refrigerant you add.
    4. Add PAG Oil (if necessary): If components were replaced or a leak caused significant oil loss, the correct amount and type of PAG 46 oil must be added. Refer to the service manual for precise amounts based on the component replaced.

    Common A/C Problems for This Vehicle

    While generally reliable, certain A/C issues can crop up in this generation of Honda Accord:

    • Compressor Failures: The A/C compressor is the heart of the system. Issues can range from internal wear to clutch problems, leading to a loud noise, lack of cooling, or a complete failure to engage.
    • Condenser Issues: The condenser, located at the front of the vehicle, is susceptible to damage from road debris. A blocked or damaged condenser can hinder heat transfer, reducing cooling efficiency. Leaks can also develop.
    • Evaporator Leaks: The evaporator, located inside the dashboard, can develop leaks, causing a loss of refrigerant and a musty smell if moisture builds up. This is a more involved repair due to its location.
    • Electrical Issues: Problems with pressure switches, relays, or the climate control module can prevent the A/C system from operating correctly.

    When to Call a Pro

    Working with R-1234yf and A/C systems, in general, requires specialized knowledge, tools, and adherence to environmental regulations. If you're experiencing A/C problems, it's always best to consult a certified professional who has:

    • The correct R-1234yf recovery and recharging equipment.
    • The expertise to accurately diagnose and repair A/C system issues.
    • An EPA 609 certification for handling refrigerants.

    Safety Disclaimer: Working on automotive A/C systems can be dangerous. Refrigerants are under high pressure and can cause severe frostbite if they come into contact with skin or eyes. Improper handling can also lead to environmental harm. It is highly recommended that A/C system work be performed by a certified professional.

    Find a certified A/C shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-25.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email