Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Bulb Sizes (Headlight, Tail, Fog)

    2020 Honda Accord Bulb Sizes: The Complete Replacement Guide

    Everything on this vehicle

    A master technician's complete lighting guide for the 2020 Honda Accord.

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    As an ASE-certified master technician, I see dozens of 10th-generation Honda Accords roll through the shop every month. The 2020 Honda Accord is a fantastic, reliable sedan, but when it comes time to change a burnt-out bulb, the sheer variety of lighting configurations across different trim levels can be confusing.

    Whether you’re driving a base LX, a sporty 2.0T, or a fully loaded Touring, knowing your exact bulb sizes is the first step to getting back on the road safely. In this guide, we will break down the exact bulb sizes for the 2020 Honda Accord, how to upgrade them, and common issues to look out for.

    Quick Reference: 2020 Honda Accord Bulb Sizes

    Note: The 10th-generation Accord (2018–2022) heavily utilizes integrated LED assemblies for primary lighting, especially on higher trims (Touring). If your vehicle is equipped with factory-integrated LEDs, the bulb cannot be replaced individually; the entire assembly must be replaced if it fails.

    LocationBulb SizeType
    Low Beam HeadlightIntegrated LEDLED
    High Beam HeadlightH9 (LX, EX, Sport) / Integrated LED (Touring)Halogen / LED
    Fog LightH8 / Integrated LEDHalogen / LED
    Daytime Running Light (DRL)Integrated LEDLED
    Front Turn Signal1157NA (or LED on Touring)Halogen / LED
    Rear Turn Signal7440NA (7440A)Halogen
    Brake LightIntegrated LEDLED
    Tail LightIntegrated LEDLED
    Reverse Light7440 (W21W)Halogen
    License Plate Light168 (W5W / T10)Halogen
    Front Side MarkerIntegrated LEDLED
    Dome LightDE3175 (31mm Festoon)Halogen
    Map Light168 / 194Halogen

    LED vs Halogen Upgrade Considerations

    For lower and mid-level trims that still use halogen bulbs for the high beams, fog lights, and turn signals, upgrading to aftermarket LEDs is a very popular modification. However, as a technician, I always warn owners about a few specific considerations:

    • CANBUS Errors and Hyperflashing: If you upgrade your turn signals (1157NA front or 7440NA rear) to LED, the vehicle's computer will detect a drop in power draw and assume the bulb is burnt out. This results in "hyperflashing" (a rapid blinking of the turn signal). You will need to install inline load resistors or purchase LED bulbs with built-in CANBUS anti-hyperflash technology.
    • High Beam Upgrades (H9): The factory halogen H9 high beams on lower trims are adequately bright, but LEDs provide a better color match to the factory LED low beams. Make sure to buy LED bulbs with an adjustable collar so you can properly align the LED chips at 3 and 9 o'clock. If they are misaligned, your beam pattern will scatter and blind oncoming drivers.
    • Space Constraints: Some high-lumen aftermarket LEDs have large cooling fans or heat sinks. Ensure there is enough clearance behind the headlight housing and the dust cover to accommodate the extra bulk.

    How to Replace Each Bulb

    • High Beam Headlights: Accessed from under the hood. On the passenger side, you may need to unclip and move the washer fluid reservoir neck slightly for better access. Twist the H9 bulb counterclockwise to remove it.
    • Fog Lights: The easiest way to access the H8 halogen fog lights is by turning the steering wheel all the way to one side, removing a couple of plastic push-clips from the inner wheel well liner, and peeling the liner back to reach behind the bumper.
    • Front Turn Signals: Also accessed under the hood, just behind the headlight assembly. It's a standard twist-and-pull socket.
    • Rear Turn Signals and Reverse Lights: Open the trunk and remove the inner felt liner behind the tail lights (held by push clips). You will see the bulb sockets. Twist counterclockwise to remove.
    • License Plate Lights: These can be popped out from the outside using a plastic trim removal tool. Twist the socket out and pull the small 168 wedge bulb straight out.
    • Interior Dome/Map Lights: Carefully pry the clear plastic lenses off using a small plastic pry tool. Do not use a metal flathead screwdriver, or you will gouge the surrounding headliner and plastic console.

    Common Lighting Issues for this Generation

    The 2018-2022 Honda Accords are generally free of major electrical gremlins, but a few issues pop up occasionally:

    1. Integrated DRL Failure: There have been isolated reports of the integrated LED Daytime Running Lights dimming or burning out prematurely. Because these are sealed units, a failure here requires replacing the entire headlight assembly, which can be costly.
    2. Moisture in the Tail Lights: Some 10th-gen Accords experience condensation buildup in the rear tail light housings. If the moisture doesn't evaporate after a day in the sun, the seal may be compromised, and the housing should be inspected or replaced.

    If you're dealing with a complex electrical issue, hyperflashing that won't go away, or need a sealed headlight assembly replaced, don't risk damaging your vehicle's wiring harness. Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-21.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email