Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Spark Plug Type & Gap

    2020 Honda Accord Spark Plug Specs & Replacement Guide

    Everything on this vehicle

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    EngineOEM Plug PNAftermarket (NGK)Gap (in/mm)Torque (lb-ft / Nm)Interval
    1.5L L4 TurboNGK DILKAR7G8NGK DILKAR7G80.031-0.035 in / 0.8-0.9 mm11 lb-ft / 15 Nm100,000 miles
    2.0L L4 TurboNGK DILKAR7G8NGK DILKAR7G80.031-0.035 in / 0.8-0.9 mm11 lb-ft / 15 Nm100,000 miles

    Why the right plug matters

    Selecting the correct spark plug for your 2020 Honda Accord is crucial for optimal engine performance, fuel economy, and longevity. Spark plugs are not "one size fits all" components; they are carefully engineered to meet specific engine requirements.

    The heat range of a spark plug is critical. A "cold" plug dissipates heat quickly and is suitable for high-performance or forced induction engines (like your Accord's turbo engines) to prevent pre-ignition and detonation. A "hot" plug retains more heat and is used in engines that tend to foul plugs. Using a plug with the wrong heat range can lead to serious engine damage or premature plug failure.

    The electrode metal also plays a significant role in a plug's performance and lifespan. Most modern vehicles, including the 2020 Honda Accord, come equipped with iridium spark plugs from the factory. Iridium is an extremely hard and durable metal, allowing for very fine electrodes that produce a strong, consistent spark. This translates to better fuel efficiency, smoother idling, and extended replacement intervals (typically 100,000 miles or more).

    Platinum plugs offer a good balance of performance and durability, lasting longer than traditional copper plugs but not quite as long as iridium. They are often used as an upgrade over copper plugs in older vehicles.

    Copper plugs have a larger copper core electrode, which is an excellent conductor of electricity. However, copper is a softer metal, so these plugs wear out more quickly and require more frequent replacement. They are generally found in older vehicles or those with less demanding ignition systems.

    For your 2020 Honda Accord, the factory specifies iridium plugs, and sticking to this recommendation is highly advised.

    How to gap a spark plug

    While most iridium spark plugs come pre-gapped from the factory, it's always a good practice to verify the gap before installation. The specified gap for your 2020 Honda Accord's engines is generally between 0.031 and 0.035 inches (0.8-0.9 mm).

    To gap a spark plug, you'll need a wire-type gap gauge. Avoid using the coin-style gauges, as they can damage the fine iridium electrode.

    1. Check the gap: Slide the appropriate wire gauge between the center and ground electrodes. There should be a slight drag.
    2. Adjust if necessary: If the gap is too small, gently bend the ground electrode away from the center electrode using the gapping tool's adjustment feature. If the gap is too wide, carefully tap the ground electrode on a clean, solid surface to close the gap slightly.

    Be extremely careful not to touch or bend the delicate iridium center electrode. Even a slight deformation can compromise the plug's performance and lifespan.

    Replacement procedure tips

    Replacing spark plugs in your 2020 Honda Accord is a manageable DIY task for those with some mechanical experience. Both the 1.5L and 2.0L turbo engines utilize a coil-on-plug ignition system, meaning each spark plug has its own ignition coil mounted directly above it. This eliminates the need for spark plug wires.

    1. Gather your tools: You'll need a spark plug socket (typically 14mm thin-wall for these engines), various extensions, a ratchet, a torque wrench, dielectric grease, and potentially an air compressor to blow out debris.
    2. Access the coils: The ignition coils are usually located under an engine cover. Carefully disconnect the electrical connector from each coil, then unbolt and remove the coil. Be gentle as plastics can become brittle over time.
    3. Clean around the plugs: Before removing the old plugs, use an air compressor or vacuum to clear any dirt or debris from around the spark plug wells. This prevents contaminants from falling into the combustion chamber when the old plug is removed.
    4. Remove old plugs: Use your spark plug socket and extension to carefully loosen and remove the old spark plugs. Turn counter-clockwise. Take note of their appearance, as they can offer clues about your engine's health.
    5. Anti-seize debate: There

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email