Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2020 Honda Accord Oil Capacity & Filter Reference

    Everything on this vehicle

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2020 Honda Accord requires 3.4 to 4.6 quarts (3.2 to 4.4 liters) of oil, depending on the engine. Always verify your engine and fill to the level indicated on the dipstick.

    Quick Answer

    • Oil Capacity (1.5L Turbo): 3.4 quarts / 3.2 liters (with filter change)
    • Oil Capacity (2.0L Turbo): 4.6 quarts / 4.4 liters (with filter change)
    • Oil Capacity (2.0L Hybrid): 4.2 quarts / 4.0 liters (with filter change)
    • Recommended Oil Weight: 0W-20
    • Oil Specification: API SP / ILSAC GF-6 or Honda HTO-06 (for turbo models)
    • Oil Filter (OEM): 15400-PLM-A02
    • Oil Filter (Fram): PH7317
    • Oil Filter (Wix): 57356
    • Oil Filter (Mobil 1): M1-110A

    Capacity by Engine Option

    EngineOil Capacity (with filter)Recommended Oil Weight
    1.5L Turbo (L15BE)3.4 qts / 3.2 L0W-20 Synthetic
    2.0L Turbo (K20C4)4.6 qts / 4.4 L0W-20 Synthetic
    2.0L Hybrid (LFB1)4.2 qts / 4.0 L0W-20 Synthetic

    Oil Change Interval

    The 2020 Accord is equipped with the Honda Maintenance Minder system, which calculates the remaining oil life based on driving habits and conditions. When the "Oil Life" percentage reaches 15%, it's time to plan your oil change.

    • Normal Duty: The Maintenance Minder will typically recommend an oil change every 7,500 to 10,000 miles or 12 months. This assumes a mix of city and highway driving in moderate temperatures.
    • Severe Duty: If you frequently drive in stop-and-go traffic, take short trips (under 5 miles), drive in extreme temperatures (over 90°F or below 10°F), or drive in dusty/hilly conditions, the Maintenance Minder will recommend shorter intervals, often between 3,500 and 5,000 miles.

    Drain Plug Torque

    • Drain Plug Torque: 30 ft-lbs (40 N-m)
    • Crush Washer: Always use a new 14mm crush washer (part number 94109-14000) with every oil change to prevent leaks from the drain plug.

    How to Change the Oil

    Changing the oil on a 2020 Accord is a straightforward process.

    1. Warm up the engine for a few minutes to allow the oil to flow easily.
    2. Safely raise and support the vehicle using jack stands or ramps.
    3. Place a drain pan under the oil drain plug, located on the back of the oil pan.
    4. Remove the 17mm drain plug and let the old oil drain completely.
    5. While the oil is draining, locate and remove the oil filter. Be prepared for some oil spillage.
    6. Wipe the filter mounting surface clean and apply a thin layer of new oil to the gasket of the new filter.
    7. Install the new filter and tighten it hand-tight, plus an additional 3/4 turn.
    8. Reinstall the drain plug with a new crush washer and torque to 30 ft-lbs.
    9. Fill the engine with the correct amount and type of 0W-20 synthetic oil.
    10. Start the engine, let it run for a minute, then shut it off. Wait a few minutes and re-check the oil level on the dipstick, adding more if necessary.
    11. Reset the Maintenance Minder system through the vehicle's infotainment display.

    Common Issues / Tips

    • Oil Dilution (1.5L Turbo): Early models of the 1.5L turbo engine had some reports of fuel diluting the engine oil, especially in cold climates with frequent short trips. Honda issued software updates to address this. Using the recommended 0W-20 API SP synthetic oil and following the Maintenance Minder is critical to mitigate any potential issues.
    • Filter Access: The oil filter is easily accessible from underneath the vehicle, just above the drain plug, making changes relatively simple.
    • Use Full Synthetic: For both turbocharged engines and the hybrid, using a high-quality full synthetic 0W-20 oil that meets the API SP or ILSAC GF-6 specification is essential for proper engine protection and performance.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-08-17.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email