Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2020 Honda Accord Torque Specifications Guide

    Everything on this vehicle

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2020 Honda Accord

    Spark Plugs
    For 1.5L and 2.0L engines. Hand-tighten then torque.

    From the table below. Confirm with your owner's manual for your exact engine.

    2020 Honda Accord Torque Specifications Guide

    Maintaining the correct torque on fasteners is crucial for the safety and longevity of your 2020 Honda Accord. This guide provides essential torque specifications for common service items, helping ensure critical components are secured properly.

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts80 / 108
    Oil Drain Plug30 / 40Always use a new crush washer
    Transmission Drain Plug (CVT)33 / 44Always use a new crush washer
    Front Brake Caliper Bracket Bolts85 / 115
    Rear Brake Caliper Bracket Bolts53 / 72
    Front Brake Caliper Slide Pins18 / 25Apply high-temp grease to pins
    Rear Brake Caliper Slide Pins18 / 25Apply high-temp grease to pins
    Axle Nut (Front)181 / 245Stake the nut after torquing
    Spark Plugs13 / 18For 1.5L and 2.0L engines. Hand-tighten then torque.
    Valve Cover Bolts (1.5L Engine)8.7 / 12Torque in sequence (if applicable)
    Valve Cover Bolts (2.0L Engine)8.7 / 12Torque in sequence (if applicable)

    Wheel Lug Torque Pattern

    For the 2020 Honda Accord, the wheel lug nuts should always be tightened in a star pattern or cross pattern. This ensures even seating of the wheel against the hub, preventing warping of the brake rotor and potential wheel loosening. Tighten in several stages until the final torque specification is reached.

    Brake Torque Notes

    When working on your Accord's brakes, proper torque is paramount for safety. For brake caliper bracket bolts, ensure threads are clean and free of rust or debris before assembly. Brake caliper slide pins typically require a high-temperature grease to ensure smooth operation and prevent seizing. Always follow a consistent torquing pattern for bracket bolts, tightening in stages if necessary, to ensure even pressure.

    Why Torque Matters

    Applying the correct torque to fasteners is not just a recommendation; it's a critical safety and reliability measure. Under-torqued fasteners can vibrate loose, leading to catastrophic component failure – imagine a wheel falling off or a brake caliper detaching. Over-torqued fasteners are equally problematic, as they can stretch or strip threads, crack components, or permanently deform parts. This can result in leaks, premature wear, or even breakage. Proper torque ensures components are securely fastened, distributing stress evenly and preventing premature failure. It's especially vital for components subjected to high stresses, vibrations, or extreme temperatures, such as those found throughout your Honda Accord's drivetrain and suspension.

    Disclaimer: *While these specifications are compiled to be accurate, they are for reference only. Always confirm critical fastener torque values with an OEM Honda service manual specific to your 2020 Accord's exact trim and engine configuration before performing any work. Discrepancies can exist between models and production years.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email