Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2020 Honda Accord Transmission & Axle Gear Ratios

    Everything on this vehicle

    Working on this 2020 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2020 Honda Accord

    3.235:1
    1.5L Turbo with CVT
    3.493:1
    2.0L Turbo with 10-speed Automatic
    3.941:1
    2.0L Turbo with 6-speed Manual

    From the table below. Confirm with your owner's manual for your exact engine.

    Transmission gear ratios

    The 2020 Honda Accord offered a few different transmission options, each with its own set of gear ratios designed to optimize performance and fuel economy for the engine it was paired with.

    CVT (Continuously Variable Transmission)

    The CVT found in most 2020 Honda Accord models (paired with both the 1.5T and 2.0T engines) operates without traditional fixed gears. Instead, it uses a system of belts and pulleys to provide an infinite number of gear ratios within a specific range. For the purpose of comparison, we can list its operating range:

    GearRatio
    Drive Ratio (Low)2.648:1
    Drive Ratio (High)0.407:1
    Reverse1.858 - 1.229:1

    10-Speed Automatic Transmission

    Exclusively paired with the more powerful 2.0-liter turbocharged engine, the 10-speed automatic transmission offers a robust gear set designed for both spirited driving and efficient cruising.

    GearRatio
    1st4.648:1
    2nd3.010:1
    3rd1.960:1
    4th1.494:1
    5th1.253:1
    6th1.000:1
    7th0.809:1
    8th0.672:1
    9th0.573:1
    10th0.504:1
    Reverse3.376:1

    6-Speed Manual Transmission

    For enthusiasts, the 2020 Accord Sport and Touring trims with the 2.0T engine were available with a 6-speed manual transmission, offering direct control over gear selection.

    GearRatio
    1st3.647:1
    2nd2.140:1
    3rd1.394:1
    4th1.026:1
    5th0.825:1
    6th0.686:1
    Reverse3.647:1

    Available axle ratios

    Unlike traditional rear-wheel-drive vehicles with a separate rear axle, the front-wheel-drive 2020 Honda Accord utilizes a transaxle, where the transmission and differential are integrated into one unit. Therefore, what we refer to as "axle ratio" for the Accord is essentially the final drive ratio within the transaxle. These ratios are chosen by Honda to complement the power band of each engine and optimize the vehicle's overall performance characteristics.

    RatioAvailable WithRPO/Axle CodeBest For
    3.235:11.5L Turbo with CVTN/A (Integrated Transaxle)Balanced / Fuel Economy
    3.493:12.0L Turbo with 10-speed AutomaticN/A (Integrated Transaxle)Balanced / Performance
    3.941:12.0L Turbo with 6-speed ManualN/A (Integrated Transaxle)Performance / Driver Engagement

    How to identify your axle ratio

    For a front-wheel-drive vehicle like the 2020 Honda Accord, identifying the "axle ratio" isn't done in the same way as a rear-wheel-drive truck or SUV with a separate rear differential housing and an axle tag. There isn't an RPO sticker with a specific axle code like those found on General Motors vehicles, nor is there an easily accessible axle tag like on Ford or Ram trucks.

    To determine the final drive ratio of your 2020 Honda Accord, the most reliable methods are:

    • Owner's Manual: Your owner's manual often lists the specifications for your particular vehicle, including the final drive ratio for each transmission and engine combination.
    • VIN Decoder: Using your Vehicle Identification Number (VIN) with an online VIN decoder service or by contacting a Honda dealership can provide detailed build information for your specific car, which will include the transmission type and its corresponding final drive ratio. Dealerships have access to Honda's comprehensive database.
    • Underhood Emission Label: Sometimes, basic powertrain information, including transmission type, can be found on a label under the hood.

    Towing vs MPG impact

    The final drive ratio plays a crucial role in balancing a vehicle's acceleration, top speed, and fuel efficiency. For the 2020 Honda Accord, with its integrated transaxle, the principles remain the same:

    • Numerically Lower Ratio (e.g., 3.235:1): A numerically lower final drive ratio means the engine doesn't have to spin as fast to achieve a given road speed. This typically results in better fuel economy on the highway, as the engine operates at lower RPMs. However, it can slightly reduce off-the-line acceleration and may make the vehicle feel less responsive, especially when carrying heavy loads or trying to accelerate quickly. Given the Accord's primary role as a passenger sedan, a numerically lower ratio is generally considered "better for MPG."

    • Numerically Higher Ratio (e.g., 3.941:1): A numerically higher final drive ratio means the engine will spin at higher RPMs for a given road speed. This provides quicker acceleration and a more responsive feel, as more torque is delivered to the wheels. This is generally preferred for performance-oriented driving. While the Honda Accord is not designed for significant towing, if it were, a numerically higher ratio would provide more mechanical advantage for pulling heavy loads, making it "better for towing." However, the trade-off is often reduced fuel economy, especially at highway speeds.

    For the 2020 Honda Accord, the various final drive ratios are carefully selected to match the engine's power delivery and the intended driving characteristics of each trim and transmission option. The CVT-equipped models with the 1.5T engine prioritize fuel efficiency, while the 2.0T paired with the 6-speed manual or 10-speed automatic offers a more performance-oriented feel.

    Common issues

    The 2020 Honda Accord is generally a reliable vehicle. When it comes to powertrain components, including transmissions and differentials (integrated into the transaxle), severe widespread "common issues" specifically related to the gear ratios themselves or the differential components are not widely reported. However, like any mechanical system, wear and tear can occur over time. Some general considerations for transaxle health include:

    • Fluid Degradation: Modern transmissions, especially CVTs, rely heavily on clean, properly specified fluid. Neglecting fluid changes can lead to premature wear of internal components, including bearings and clutches/belts, which can manifest as whining noises or performance issues. While not a direct "ratio problem," healthy fluid ensures the ratios can be achieved and maintained properly.
    • CVT Belt/Pulley Wear (in CVT models): While the Accord's CVT is generally robust, prolonged heavy use or lack of maintenance can lead to wear on the drive belt and pulley surfaces, potentially causing slipping, unusual noises, or eventually impacting the CVT's ability to maintain optimal ratios. This would be felt as a loss of power or hesitation.
    • Bearing Wear: Both automatic transmissions and manual transaxles contain numerous bearings. Over time, these can wear out, leading to whining or humming noises that change with vehicle speed and load. This isn't specific to a ratio but can affect the overall health and quiet operation of the drivetrain.

    Regular maintenance according to Honda's schedule, particularly timely transmission fluid changes, is the best way to prevent issues and ensure the longevity of your transaxle.

    Find a driveline shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2020 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email