2020 Honda Accord Key Fob Programming
Working on this 2020 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Item | Detail |
|---|---|
| FCC ID | CWTWB1G0090 |
| OEM Fob PN | 72147-TVA-A11, 72147-TVA-A01 |
| Aftermarket Options | KeylessOption, RemotesRemotes, Keyless-Entry-Remote-Fob |
| Battery Type | CR2032 |
| Programmable On-Board? | No, requires professional scan tool |
| Cuts Required? | Yes, laser cut key |
Step-by-step on-board programming
Unfortunately, the 2020 Honda Accord does not have an on-board programming procedure for new key fobs. This is due to the advanced security features of the vehicle, which require a specialized diagnostic scan tool to pair a new key with the car's immobilizer system. This is not a procedure that can be performed at home with simple key cycles or button presses.
To program a new key fob, you will need to take your vehicle to a Honda dealership or a qualified automotive locksmith. They have the necessary equipment and software to access the vehicle's computer and securely program the new key.
Battery replacement
Replacing the battery in your 2020 Honda Accord key fob is a simple task you can do at home.
- Locate the release button: On the back of the key fob, you will see a small release button. Press this button to release the emergency key.
- Remove the emergency key: Pull the emergency key out of the fob.
- Separate the fob casing: Insert the tip of the emergency key, or a small flathead screwdriver, into the slot where the key was and gently twist to separate the two halves of the fob.
- Replace the battery: The fob uses a CR2032 battery. Note the orientation of the old battery before removing it. The positive (+) side should be facing up. Insert the new battery in the same orientation.
- Reassemble the fob: Snap the two halves of the fob back together until they click. Re-insert the emergency key.
Where to buy a replacement fob
- Honda Dealership: This is the most expensive option, but you are guaranteed to get a genuine OEM key fob. The cost for a new fob and programming can range from $250 to $500.
- Automotive Locksmith: A locksmith can often provide and program a new key fob for less than the dealership, typically in the $150 to $350 range. They can also cut the emergency key for you.
- Online Retailers (Amazon, eBay): You can find aftermarket key fobs online for as little as $50. However, the quality can be inconsistent, and you will still need to have the fob programmed and the key cut by a locksmith or dealer, which will add to the overall cost.
If on-board programming isn't supported
The 2020 Honda Accord's immobilizer system is designed to prevent vehicle theft by requiring a unique transponder chip in the key to start the engine. When a new key is programmed, the scan tool registers the new transponder with the vehicle's immobilizer. This is a security measure that prevents unauthorized keys from being used. The cost for this service is primarily for the labor and the use of the expensive diagnostic equipment required for the programming.
Find a mobile locksmith or shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2020 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Same spec — other model years
Maintenance & repair guides
2020 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-08-22.