Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    A/C Refrigerant & Oil

    2024 Kenworth W900: A/C Refrigerant & Oil Specifications

    Working on this 2024 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Refrigerant Type: R-134a
    • Full System Charge: 56 oz (1588 g)
    • PAG Oil Type: PAG 46
    • PAG Oil Amount: 10.1 oz (300 mL)
    • Low-Side Service Port Location: Typically found on the larger diameter A/C line near the firewall on the passenger side of the engine compartment.
    • High-Side Service Port Location: Usually located on the smaller diameter A/C line, often near the condenser at the front of the truck.

    Why R-134a Persists in Heavy-Duty Trucks

    While most passenger vehicles have transitioned to the more environmentally friendly but costly R-1234yf refrigerant, many heavy-duty trucks like the 2024 Kenworth W900 continue to use R-134a. This is largely due to the robust and proven nature of R-134a systems, their lower service cost, and the different regulatory timelines for commercial vehicles. However, the industry is slowly shifting, and future models will likely adopt R-1234yf, which requires dedicated, more expensive recovery and recharge machines.

    Recharge Procedure

    Properly servicing your Kenworth's A/C system is crucial for its longevity and performance. Always remember that the only way to ensure an accurate charge is by weight, not by using pressure gauges, which can be misleading due to ambient temperature variations.

    1. Recover: Use an approved R-134a recovery machine to safely remove all existing refrigerant from the system.
    2. Evacuate: Pull the system into a deep vacuum (at least 29.9 inHg) for a minimum of 45-60 minutes. This removes all air and moisture, which are enemies of a healthy A/C system.
    3. Recharge: Inject the precise amount of PAG 46 oil if components were replaced, and then charge the system with exactly 56 oz (1588 g) of R-134a refrigerant.

    Common A/C Problems for Kenworth W900

    • Compressor Failures: Given the high-mileage and demanding nature of commercial trucking, compressor clutch and internal failures are common. These are often preceded by noise or intermittent cooling.
    • Condenser Damage: Located at the front of the truck, the condenser is susceptible to damage from road debris. Even minor impacts can cause refrigerant leaks.
    • Evaporator Core Leaks: Leaks in the evaporator core, located inside the cab's HVAC unit, can be difficult to diagnose. Telltale signs include a musty smell from the vents or a persistent loss of refrigerant with no visible external leaks.

    When to Call a Pro

    While topping off a system might seem straightforward, it's often a temporary fix for a larger problem, like a leak. For accurate diagnosis, leak detection, and component replacement, it's best to consult a certified professional. They have the specialized tools and experience to do the job right the first time.

    Safety Disclaimer: Always wear safety glasses when working with refrigerants. The U.S. Environmental Protection Agency (EPA) requires anyone servicing motor vehicle A/C systems to be certified under Section 609 of the Clean Air Act. Venting refrigerant is illegal and harmful to the environment.


    Find a certified A/C shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-08-21.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email