2024 Kenworth W900 Torque Specifications
Working on this 2024 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer — 2024 Kenworth W900
- Wheel Lug Nuts
- 450-500 ft-lb (610-678 Nm)
- Oil Drain Plug
- 50-65 ft-lb (68-88 Nm)
- Transmission Drain Plug
- 40-50 ft-lb (54-68 Nm)
- Brake Caliper Bracket Bolts
- 180-220 ft-lb (244-298 Nm)
From the table below. Confirm with your owner's manual for your exact engine.
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 450-500 ft-lb (610-678 Nm) | Always use the star/cross pattern for tightening. |
| Oil Drain Plug | 50-65 ft-lb (68-88 Nm) | Refer to engine specific manual as values may vary slightly by engine |
| Transmission Drain Plug | 40-50 ft-lb (54-68 Nm) | For common Eaton Fuller transmissions. Check specific transmission manual. |
| Brake Caliper Bracket Bolts | 180-220 ft-lb (244-298 Nm) | Typically large bolts, crucial for brake caliper mounting. |
| Brake Caliper Slide Pins | 30-40 ft-lb (41-54 Nm) | Ensure pins are clean and properly lubricated for smooth operation. |
| Axle Nut | 400-500 ft-lb (542-678 Nm) | Critical for wheel bearing preload. Follow manufacturer's specific procedure for setting and torquing. |
| Spark Plugs | Not applicable | Kenworth W900 typically uses diesel engines, which do not have spark plugs. |
| Glow Plugs | 10-15 ft-lb (14-20 Nm) | (If applicable to engine) |
| Valve Cover Bolts | 15-20 ft-lb (20-27 Nm) | Usually tightened in a specific sequence to ensure even gasket compression. |
| Intake Manifold Bolts | 18-25 ft-lb (24-34 Nm) | Follow manufacturer's specified tightening sequence. |
Wheel lug torque pattern
For the 2024 Kenworth W900, the wheel lug nuts should always be tightened in a star or cross pattern. This ensures even pressure distribution around the wheel, preventing warping of the wheel or rotor and ensuring the wheel is securely seated. After initial tightening, it is crucial to re-check the torque after 50-100 miles of driving, especially on new wheels or after tire changes, as lug nuts can settle.
Brake torque notes
When working on the braking system of the Kenworth W900, precision is paramount. Brake caliper bracket bolts are subjected to immense forces and must be torqued to specifications to ensure the caliper remains rigidly mounted. Loose caliper bracket bolts can lead to inefficient braking, uneven pad wear, and potentially catastrophic failure. Similarly, brake caliper slide pins, while requiring lower torque, are essential for the smooth movement of the caliper. Proper lubrication and correct torque on these pins prevent binding and ensure even pad wear and optimal braking performance. Always use new hardware where specified by the manufacturer, and apply thread locker if indicated.
Why torque matters
Accurate torque application is not just a recommendation; it's a critical safety and longevity requirement for all fasteners on your 2024 Kenworth W900. Under-torquing a fastener can lead to it loosening over time due to vibrations and stresses, potentially causing parts to separate, leaks, or even failure of critical components. For example, an under-torqued wheel lug nut can lead to the wheel detaching, and an under-torqued oil drain plug can cause oil leaks and engine damage. Over-torquing is equally detrimental. It can strip threads, stretch bolts beyond their elastic limit causing them to yield (permanently deform), or even crack the components being fastened. This weakens the fastener and the surrounding material, making it susceptible to failure under normal operating loads. For instance, over-torquing valve cover bolts can warp the cover or crack cylinder head components, leading to oil leaks. Using a calibrated torque wrench is essential for ensuring that every fastener is tightened to the manufacturer's exact specifications, promoting safety, reliability, and the overall lifespan of your truck.
Disclaimer: These torque specifications are provided for general reference only. The values can vary based on specific engine models, transmission types, axle configurations, and component manufacturers installed in your 2024 Kenworth W900. For all critical fasteners, especially those related to the braking system, wheels, engine, and drivetrain, always consult the official OEM service manual for the most accurate and up-to-date specifications. Failure to follow proper torque procedures can result in severe mechanical damage, personal injury, or death.
Find a trusted shop on Repairius.
Need service on your Kenworth W900?
Your vehicle and question are already filled in — just add your location.
More specs for the 2024 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-27.