Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2024 Kenworth W900 Transmission & Axle Gear Ratios

    Working on this 2024 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Transmission gear ratios

    The 2024 Kenworth W900, a legendary long-haul ट्रक, offers a range of robust transmission options designed to meet the diverse demands of heavy-duty hauling. The specific gear ratios available will depend on the chosen transmission model, typically from Eaton-Fuller or Allison. Eaton-Fuller transmissions are known for their manual and automated manual configurations, while Allison transmissions are fully automatic.

    Here are representative gear ratios for common transmission types found in the 2024 Kenworth W900. Please note that specific ratios can vary slightly based on the exact transmission model and revision. Always consult your vehicle's owner's manual or build sheet for precise specifications.

    Eaton-Fuller 18-Speed Automated Manual Transmission (AMT) Ratios (Example: Advantage Series)

    GearRatio
    1st14.40
    2nd12.29
    3rd8.56
    4th7.30
    5th6.20
    6th5.29
    7th4.41
    8th3.76
    9th3.20
    10th2.73
    11th2.29
    12th1.95
    13th1.63
    14th1.39
    15th1.17
    16th1.00
    17th0.86
    18th0.73
    Reverse14.93

    Allison 4000 Series Automatic Transmission Ratios (Example)

    GearRatio
    1st4.70
    2nd2.21
    3rd1.53
    4th1.15
    5th0.85
    6th0.65
    Reverse5.51

    Available axle ratios

    The final drive or axle ratio is a critical component in optimizing a Kenworth W900's performance, dictating the balance between fuel efficiency and pulling power. Kenworth offers a wide array of axle ratios to suit various applications, from regional hauling to heavy-haul operations.

    RatioAvailable With (engine/trim/package)RPO/Axle CodeBest For
    2.64Fuel Economy Packages (e.g., PACCAR MX-13 with optimized aerodynamics)Varies by manufacturerHighway long-haul, superior MPG
    2.79Fuel Economy and Balanced PerformanceVaries by manufacturerBalanced long-haul, good MPG
    3.08General Hauling, Some Heavy LoadsVaries by manufacturerVersatile, good for diverse loads
    3.25Heavy Haul, Construction, VocationalVaries by manufacturerIncreased pulling power, moderate MPG
    3.42Extreme Heavy Haul, Off-Road, Specialized ApplicationsVaries by manufacturerMaximum towing, lowest MPG

    Note: "Varies by manufacturer" acknowledges that while Kenworth specifies the ratio, the specific RPO/Axle codes are often tied to the axle manufacturer (e.g., Meritor, Dana).

    How to identify your axle ratio

    Identifying your Kenworth W900's axle ratio is crucial for maintenance, repairs, and performance tuning. While no single "RPO sticker" like those found in light-duty trucks exists for all heavy trucks, here are the primary methods:

    • Door Jamb or Cab Sticker: Kenworth often places a certification label or data sticker on the driver's side door jamb or inside the cab (e.g., on the rear wall or glove box). This sticker typically contains vital vehicle information, including VIN, gross vehicle weight ratings (GVWR), and sometimes axle specifications or codes that can be cross-referenced.
    • Axle Tag: Most heavy-duty axles (Meritor, Dana, Eaton) have a metal tag bolted to one of the differential housing bolts. This tag will contain the axle model number, serial number, and the specific gear ratio. The ratio is often stamped directly on the tag (e.g., "3.55" or "41:11" indicating 41 ring gear teeth and 11 pinion teeth, which divides to approximately 3.73).
    • Build Sheet/Line Set Ticket: The most definitive source is the original build sheet or line set ticket from Kenworth. This document details every component installed on your specific truck, including exact transmission and axle ratios. Kenworth dealerships can often retrieve this information using your VIN.
    • VIN Decoder (Limited): While VIN decoders are excellent for initial vehicle identification, they may not always provide the granular detail of specific axle ratios for heavy trucks. They are more likely to list the general axle type.

    Towing vs MPG impact

    The axle ratio has a profound impact on how your Kenworth W900 performs:

    • Numerically Lower Ratio (e.g., 2.64, 2.79): These are often referred to as "taller" gears. They allow the engine to run at lower RPMs at highway speeds. This directly translates to improved fuel economy, reduced engine wear, and quieter operation. However, a lower numerical ratio means less torque multiplication to the wheels. This can result in slower acceleration and reduced pulling power, making them less suitable for extremely heavy loads, frequent starts and stops, or mountainous terrain.
    • Numerically Higher Ratio (e.g., 3.25, 3.42): These are "shorter" or "lower" gears. They provide greater torque multiplication, which means significantly increased pulling power and better acceleration, especially beneficial when starting with heavy loads or operating in demanding conditions like steep grades or vocational applications. The trade-off is higher engine RPMs at highway speeds, leading to worse fuel economy and potentially increased engine noise and wear over long distances.

    Choosing the correct axle ratio is a delicate balancing act tailored to a truck's primary application. Long-haul carriers prioritize lower numerical ratios for MPG, while heavy-haul and vocational operators lean towards higher numerical ratios for raw pulling power.

    Common issues

    Heavy-duty differentials are built for punishment, but like all mechanical components, they can experience wear and issues over time. Common issues in Kenworth W900 axles and differentials include:

    • Ring and Pinion Whine: A persistent howling or whining noise that changes with road speed and load is often indicative of worn, improperly set up, or damaged ring and pinion gears. This can be caused by improper backlash, worn bearings, or impacts.
    • Carrier Bearing Failure: The bearings supporting the differential carrier can wear out, leading to growling noises, especially when cornering, and potentially excessive play in the driveshaft. If left unaddressed, this can lead to catastrophic differential failure.
    • Limited-Slip Clutch Wear (if equipped): For trucks equipped with limited-slip differentials (designed to provide traction to both wheels), the internal clutches can wear out over time. Symptoms include a chattering or grinding noise during turns, especially at slow speeds, and reduced traction in slippery conditions. Open differentials do not have this issue.
    • Axle Seal Leaks: Leaks from the pinion seal or axle shaft seals are common and, if left unaddressed, can lead to insufficient lubrication and damage to internal components. Regular inspection is key.

    Prompt diagnosis and repair by a qualified technician are essential to prevent minor issues from escalating into major, costly repairs.

    Find a driveline shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email