Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Key Fob Programming

    2024 Kenworth W900 Key Fob Programming & Replacement Guide

    Everything you need to know about replacing, programming, and maintaining your Kenworth W900 remote.

    Working on this 2024 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    As an ASE-certified electrical technician and locksmith dealing with heavy-duty commercial vehicles, I frequently get questions from owner-operators about modern truck key systems. The 2024 Kenworth W900 is an iconic rig, but its electronics are completely thoroughly modern. Paccar has updated the W900's body control architecture over the years, meaning remote keyless entry (RKE) and immobilizer systems are now deeply integrated into the truck's computer network.

    Here is your comprehensive guide to replacing, repairing, and programming the key fob for a 2024 Kenworth W900.

    Quick reference

    ItemDetail
    FCC IDVaries by build (Commonly GQ4-54T or Paccar-specific)
    OEM Fob PNQ21-1077 series (Verify with VIN)
    Aftermarket OptionsLimited; generally restricted to commercial heavy-duty suppliers
    Battery TypeCR2032
    Programmable On-Board?No (Requires commercial diagnostic tool)
    Cuts Required?Yes, physical ignition key must be cut

    Step-by-step on-board programming

    If you are hoping for a DIY "turn the key on and off five times and press lock" procedure, I have bad news. The 2024 Kenworth W900 does not support on-board, manual key fob programming.

    Because of the sophisticated multiplexed electrical system (and to prevent commercial vehicle theft), Paccar has eliminated manual pairing sequences. To program a new key fob or transponder key to a 2024 W900, you must interface directly with the truck's Body Control Module (BCM) or Engine Control Module (ECM) via the 9-pin green diagnostic port.

    This requires one of the following:

    1. Paccar's proprietary DAVIE4 diagnostic software.
    2. An advanced, heavy-duty aftermarket scan tool (such as JPRO, Texa TXT Multihub, or Autel MaxiSys CV) with the proper key-programming authorizations.

    Because specialized heavy-duty diagnostic hardware is required, DIY programming is simply not an option for most owner-operators. You will need to hire a professional.

    Battery replacement

    While you cannot program the remote yourself, you can easily maintain it. If your remote range is severely diminished or the fob has stopped working entirely, a dead battery is the most likely culprit.

    1. Locate the seam: Look for the small notch along the side or bottom edge of the plastic key fob housing.
    2. Pry open the case: Insert a small flathead screwdriver or a coin into the notch and gently twist. Work your way around the edges until the two halves pop apart.
    3. Remove the circuit board: Carefully lift the protective rubber keypad and the circuit board out of the housing.
    4. Replace the battery: Note the orientation of the old battery. Slide the old CR2032 out of its retaining clip and slide a fresh CR2032 in, ensuring the positive (+) side is facing the correct direction (usually up).
    5. Reassemble: Place the board back into the housing, align the rubber pad, and snap the two plastic halves firmly back together. Test the lock/unlock functions.

    Where to buy a replacement fob

    When securing a replacement key or fob for a modern Kenworth, you have a few avenues, each with its own pros and cons:

    • Kenworth Dealership:
      • Pros: Guaranteed to have the exact OEM Paccar part linked to your truck’s VIN. You get factory reliability.
      • Cons: Very expensive. Dealership labor rates for heavy-duty trucks are premium, and wait times in the service bay can cost you a day on the road.
      • Price: $150–$250 for the fob/key, plus 1–2 hours of diagnostic labor (often totaling $350–$500+).
    • Heavy-Duty Commercial Locksmith:
      • Pros: Mobile service. A commercial auto locksmith can come directly to your yard, truck stop, or weigh station. They carry the necessary cutting machines and heavy-duty diagnostic scan tools to do the job on the spot.
      • Cons: Not all standard automotive locksmiths carry heavy-duty software like Texa or JPRO. You must find a specialist.
      • Price: $250–$400 total, but the convenience of mobile service saves you massive downtime.
    • Amazon / Online Retailers:
      • Pros: Cheaper upfront cost for the bare remote or blank key.
      • Cons: Finding the exact Paccar part number aftermarket is difficult. Furthermore, you will still have to pay a locksmith or dealer to cut and program it. Many shops refuse to program customer-supplied electronics due to failure rates.

    If on-board programming isn't supported

    As mentioned, since on-board programming is completely absent on the 2024 W900, you have to budget for diagnostic labor.

    If your W900 is spec'd with a passive immobilizer (transponder key), the ignition key itself has a microchip inside the plastic head. If this chip is not programmed into the truck's immobilizer module, the engine will crank but will not start. If you lose all your keys, a locksmith will need to generate a new mechanical cut from the door cylinders or by pulling the ignition code, then use their heavy-duty scanner to perform an "All Keys Lost" reset. This process clears the old keys from the truck's memory and pairs the new ones, which is highly recommended for security if a driver loses a set of keys on the road.

    If you are stranded at a truck stop or yard and need immediate assistance, don't waste time towing your rig to a dealership. Find a mobile locksmith or shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-18.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email