2024 Kenworth W900 Fluid Type Specifications
Working on this 2024 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer — 2024 Kenworth W900
- Engine Oil
- 36-44 quarts
- Engine Coolant
- 60-80 quarts
- Power Steering Fluid
- 10-14 quarts
- Windshield Washer Fluid
- 1-2 gallons
From the table below. Confirm with your owner's manual for your exact engine.
Quick Reference
| Fluid | Type/Spec | Capacity (approximate) |
|---|---|---|
| Engine Oil | CK-4/FA-4, 10W-30 or 15W-40 (Cummins/PACCAR dependent) | 36-44 quarts |
| Engine Coolant | PACCAR-approved OAT (Red/Orange), Cummins CES 14603 | 60-80 quarts |
| Transmission Fluid | Eaton PS-386 (manual), Allison TES 668/295 (automatic) | Varies by model |
| Front Differential Oil | Meritor O76-N (SAE 75W-90, 80W-90, or 85W-140) | 25-50 pints |
| Rear Differential Oil | Meritor O76-N (SAE 75W-90, 80W-90, or 85W-140) | 25-50 pints |
| Brake Fluid | N/A (Air Brake System) | N/A |
| Power Steering Fluid | PACCAR PS-200, Allison TES 668/295 or Dexron III/Mercon | 10-14 quarts |
| Windshield Washer Fluid | Commercial Washer Fluid (-20°F minimum) | 1-2 gallons |
| Diesel Exhaust Fluid (DEF) | API ISO 22241 (AdBlue) | 15-30 gallons |
The 2024 Kenworth W900 is a legendary workhorse, and maintaining its intricate systems with the correct fluids is paramount to its longevity and performance. This guide provides a comprehensive overview of the factory-spec fluids for the 2024 Kenworth W900, helping owner-operators and technicians ensure proper maintenance.
Engine Oil
The Kenworth W900 typically comes equipped with either Cummins or PACCAR engines, and the specific engine dictates the exact oil requirements. For both engine types, modern heavy-duty diesel engine oils meeting API CK-4 or API FA-4 standards are required.
- API CK-4: Backward compatible with older engines, offering robust wear protection and soot control. Often recommended for applications where engine operating conditions or older engine designs might benefit from its specific properties.
- API FA-4: Designed for newer engines to improve fuel economy, typically has a lower high-temperature high-shear (HTHS) viscosity. It is crucial to use FA-4 only in engines specifically designed for it, as using it in an engine not designed for FA-4 can lead to inadequate protection.
Viscosity: The most common viscosity grades are SAE 10W-30 and SAE 15W-40. The appropriate viscosity depends on ambient temperature ranges and the specific engine manufacturer's recommendations. Always consult the engine's owner's manual for the primary recommendation and approved viscosity grades based on your operating environment.
Capacity: Engine oil capacity can range from approximately 36 to 44 quarts, varying by engine model (e.g., Cummins X15, PACCAR MX-13) and oil pan design. Always perform an oil change with the specified capacity, then verify with the dipstick.
Intervals: Oil change intervals for heavy-duty trucks like the W900 are often extended due to advanced filtration and oil technology. However, strict adherence to the manufacturer's recommendations, often tied to mileage, engine hours, or even oil analysis results, is critical. Typical intervals can range from 20,000 to 75,000 miles or more, depending on duty cycle, engine, and oil type.
Pitfalls: Mixing API CK-4 and FA-4 oils is generally discouraged. Always use the specified API category. Using passenger car oils or oils not meeting the heavy-duty diesel specifications will lead to premature engine wear and potential failures.
Engine Coolant
The 2024 Kenworth W900 typically utilizes an Organic Acid Technology (OAT) coolant. These coolants are long-life formulations, often characterized by a red or orange color.
- PACCAR Engines: Require PACCAR-approved OAT coolants.
- Cummins Engines: Specifically call for coolants meeting Cummins Engineering Standard (CES) 14603 (or the newer CES 14439 for supplemental coolants that meet 14603), which is an OAT type coolant.
Capacity: The cooling system capacity is substantial, typically ranging from 60 to 80 quarts, depending on the specific engine and cooling system configuration (e.g., radiator size, presence of auxiliary coolers).
Intervals: OAT coolants are designed for extended service intervals, often up to 600,000 miles or 10,000 hours, or longer with proper maintenance and coolant quality checks (e.g., every 150,000 miles or once a year). It is crucial to regularly check the coolant level and condition.
Pitfalls: Never mix OAT coolants with older technologies like Conventional or Hybrid Organic Acid Technology (HOAT) coolants. Mixing different coolant chemistries can lead to gelling, reduced corrosion protection, and cooling system damage. Always use distilled water if mixing concentrate, never tap water, to prevent mineral deposits.
Transmission Fluid
The W900 can be equipped with various transmissions, most commonly Eaton manual transmissions or Allison automatic transmissions.
Manual Transmissions (Eaton)
- Fluid Spec: Eaton manual transmissions generally require lubricants meeting Eaton PS-386. This is a synthetic transmission fluid designed for extended drain intervals and improved performance. Some older or specific models might still use SAE 50 synthetic transmission fluid, but PS-386 is the prevalent spec for newer models.
- Capacity: Varies significantly by transmission model, typically ranging from 14 to 28 pints.
- Intervals: With Eaton PS-386, intervals can be extended, often up to 500,000 miles for line-haul applications, but this can vary based on duty cycle and model. Always check the Eaton service manual for precise recommendations.
Automatic Transmissions (Allison)
- Fluid Spec: Allison automatic transmissions require fluids meeting Allison specifications. For newer models, this is often Allison TES 668™ or its predecessor TES 295®. These are high-performance synthetic fluids designed for optimal shifting, durability, and extended drain intervals.
- Capacity: Highly dependent on the specific Allison model, typically 25-50 quarts.
- Intervals: Allison TES 668 and TES 295 fluids allow for very long drain intervals, up to 300,000 miles or 48 months for TES 295 in some applications, and even longer for TES 668. Always consult the Allison owner's manual for exact intervals based on transmission model and duty cycle.
Pitfalls: Never use "universal" ATF in Allison transmissions. Using non-approved fluids can lead to premature wear, poor shift quality, and transmission failure. For Eaton manuals, ensure the correct PS-386 or SAE 50 synthetic is used; never use engine oil or non-specified gear oils.
Differential Oil (Front and Rear)
Kenworth W900 typically uses Meritor or Dana axles.
-
Fluid Spec: For Meritor axles, the common specification is Meritor O76-N. This spec allows for various full synthetic API GL-5 gear oils, typically SAE 75W-90, SAE 80W-90, or SAE 85W-140.
- SAE 75W-90: Common for colder climates and for light to moderate duty cycles.
- SAE 80W-90: A good all-around choice for many applications.
- SAE 85W-140: Often recommended for severe duty, high heat, or heavy load applications.
Dana axles will have similar API GL-5 requirements, with specific Dana specifications guiding the choice of viscosity.
-
Capacity: Differential capacities are significant, often ranging from 25 to 50 pints per axle, depending on the differential model and configuration (e.g., single drive, tandem drive).
Intervals: Extended drain intervals are common for synthetic GL-5 gear oils in heavy-duty differentials, often up to 500,000 miles or 5 years for line-haul applications. Severe service or off-road use may require more frequent changes.
Pitfalls: Always use an API GL-5 rated gear oil. Using GL-4 or non-specified oils can lead to premature wear of hypoid gears. While some limited-slip differentials require specific friction modifiers, heavy-duty truck differentials typically do not have LSD clutches requiring such additives. Confirm with the axle manufacturer's specifications if unsure.
Brake Fluid
The 2024 Kenworth W900, being a heavy-duty truck, utilizes an air brake system and does not use hydraulic brake fluid (e.g., DOT 3, 4, 5.1) for its primary braking system. The brake system operates on compressed air.
Pitfalls: Do not attempt to add or check "brake fluid" as you would in a passenger car, as it does not apply to the W900's air brake system.
Power Steering Fluid
Power steering systems in the W900 can vary. Common fluid specifications include:
- PACCAR PS-200: A specific synthetic power steering fluid recommended for PACCAR components.
- Allison TES 668™ / TES 295®: Some power steering systems may specify these Allison transmission fluids due to their excellent resistance to breakdown and high-temperature stability.
- Dexron III / Mercon (obsolete, use equivalents): While these specific designations are technically obsolete, power steering fluids meeting the performance characteristics of these older specifications are sometimes still used. Modern equivalents of these fluids are readily available.
Capacity: Approximately 10 to 14 quarts, depending on the system configuration and reservoir size.
Intervals: Power steering fluid is often overlooked but should be checked periodically. Intervals can range from 100,000 to 200,000 miles or every 2-4 years, especially if the fluid appears dark or smells burnt.
Pitfalls: Using an incompatible fluid can lead to premature pump wear, seal degradation, and steering issues. Always consult the chassis or power steering pump manufacturer's recommendations.
Windshield Washer Fluid
- Fluid Type: Standard commercial windshield washer fluid, typically formulated to prevent freezing down to at least -20°F (-29°C). In colder climates, fluids rated for lower temperatures (-30°F or -40°F) should be used.
- Capacity: Generally 1-2 gallons.
Intervals: As needed.
Pitfalls: Avoid using plain water, especially in freezing temperatures, as it can freeze and damage the washer system components.
Diesel Exhaust Fluid (DEF)
For 2024 models equipped with selective catalytic reduction (SCR) systems (standard on modern diesel trucks), Diesel Exhaust Fluid (DEF) is essential.
- Fluid Spec: DEF must meet API ISO 22241 standards. This ensures the fluid is of the correct purity and concentration (32.5% urea solution) to prevent damage to the SCR system. It is often marketed under the brand name AdBlue.
- Capacity: DEF tank capacities typically range from 15 to 30 gallons.
Intervals: DEF consumption is typically 2-3% of fuel consumption. The DEF tank will need to be refilled regularly, often every few fuel stops, depending on usage.
Pitfalls: Only use API ISO 22241 certified DEF. Never use any other fluids, water, or contaminated DEF, as this will lead to severe damage to the SCR system, expensive repairs, and potential de-rating of the engine.
Find a trusted shop on Repairius.
Need service on your Kenworth W900?
Your vehicle and question are already filled in — just add your location.
More specs for the 2024 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-25.