Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission Fluid & Service

    2024 Kenworth W900 Transmission Fluid, Capacity, & Service Guide

    A complete guide to transmission fluid types, capacities, and maintenance for the 2024 Kenworth W900 heavy-duty truck.

    Working on this 2024 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2024 Kenworth W900 is an undisputed icon of the American highway. Whether you are spec'ing yours for heavy haul, logging, or long-haul flatbed work, the heartbeat of this rig relies heavily on its transmission. Kenworth offers a variety of transmission options for the W900, most notably the legendary Eaton Fuller manual transmissions (like the 18-speed RTLO-18918B), the automated Eaton Cummins Endurant series, and the heavy-duty Allison 4000 Series automatics.

    As an ASE-certified master technician, I know that keeping these heavy-duty gearboxes properly lubricated is the single most important factor in avoiding catastrophic downtime and massive repair bills. Below is your comprehensive guide to the transmission fluid types, capacities, and service procedures for the 2024 Kenworth W900.

    Quick Answer

    Since the Kenworth W900 is highly customizable, your exact specifications will depend on the transmission spec'd at the time of order. Below are the specifications for the two most common configurations: the Eaton Fuller 18-speed manual and the Allison 4000 Series automatic.

    Eaton Fuller Manual (e.g., RTLO-18918B)

    • Transmission Make/Model: Eaton Fuller 18-Speed Manual
    • OEM Fluid Spec: Eaton PS-386 Synthetic Transmission Fluid (SAE 40 or 50 equivalent, depending on exact spec)
    • Drain & Fill Capacity: Approximately 28 pints (14 quarts)
    • Full Overhaul Capacity: 28 pints (14 quarts) plus additional capacity for PTOs or oil coolers (usually 2-3 extra pints).
    • Filter OEM Part Number: Not applicable (standard manual transmissions do not use a conventional spin-on filter).
    • Recommended Service Interval: 500,000 miles (Linehaul) or 180,000 miles (Severe Duty) when using approved synthetic PS-386 fluid.

    Allison 4000 Series Automatic

    • Transmission Make/Model: Allison 4000 Series (4500/4700 RDS)
    • OEM Fluid Spec: Allison TES 668 (backward compatible with TES 295)
    • Drain & Fill Capacity: Approximately 39 to 43 quarts (depending on sump depth and cooler size)
    • Full Overhaul Capacity: Up to 51 quarts (verify exact sump size)
    • Filter OEM Part Number: Verify with dealer or service manual (varies based on sump size and filter kit revision).
    • Recommended Service Interval: 300,000 miles (Normal/Linehaul) or 150,000 miles (Severe Duty/Vocational).

    Fluid Type Explained

    Heavy-duty commercial transmissions require highly specialized fluids built to withstand immense shearing forces and extreme heat.

    For the Eaton Fuller manual and automated manual transmissions (AMTs), Eaton requires fluids meeting the PS-386 specification. This synthetic lubricant replaced the older PS-164 rev 7 spec. PS-386 is specifically formulated to improve fuel economy, reduce gear wear, and lower operating temperatures. Using standard gear oil (like GL-5 80W-90) in modern Eaton manuals can cause premature wear on the synchronizers and bearings, potentially voiding the warranty.

    For Allison Automatics, the gold standard is now TES 668. This specification supersedes the legendary TES 295 fluid, offering improved oxidative stability, better anti-wear performance, and enhanced clutch friction durability. While you can technically mix TES 295 and TES 668, sticking purely to TES 668 ensures your Allison transmission performs at its absolute best under heavy loads.

    Service Procedure

    Drain & Fill vs. Full Exchange

    For Eaton Fuller Manuals: The service procedure is a straightforward drain and fill. Because there is no torque converter or complex valve body retaining fluid, draining the main case removes virtually all the old fluid. Always remove the fill plug first to ensure you can refill the unit. Then, remove the drain plug and inspect the magnetic tip for excessive metal shavings. Clean the plug, reinstall it to the proper torque spec, and fill the transmission through the side fill hole until the fluid is level with the bottom of the fill plug opening.

    For Allison Automatics: A drain and fill on an Allison transmission will replace a large portion of the fluid, but a substantial amount remains trapped in the torque converter and cooler lines. For standard preventative maintenance, a drain and fill (combined with replacing the internal/external filters) is highly effective and recommended by Allison. A full fluid exchange (using a machine) is generally only necessary if the fluid has been severely contaminated (e.g., coolant mixed with ATF) or if you are upgrading from a non-synthetic to a full TES 668 synthetic fluid.

    Service Interval

    Commercial trucking service intervals are strictly dictated by how the truck is used.

    • Normal Duty (Linehaul): If your W900 is running long distances on highways at steady speeds and standard weight limits, your transmission experiences relatively low stress. In this scenario, Eaton Fuller manuals using PS-386 can push fluid changes out to 500,000 miles. Allison automatics can safely reach 300,000 miles or 48 months on a drain and fill.
    • Severe Duty (Towing, Heavy Haul, Logging, Vocational): The W900 is frequently used for heavy haul and vocational tasks. Frequent shifting, stop-and-go traffic, extreme heavy loads, steep grades, and high operating temperatures classify as severe duty. Under these conditions, the Eaton Fuller service interval drops to 180,000 miles or less (often annually depending on hours). Allison intervals drop to 150,000 miles or 24 months. Always check your fluid level and condition at every preventive maintenance (PM) service.

    Common Transmission Problems

    While the 2024 Kenworth W900 utilizes proven, bulletproof drivetrain components, no machine is immune to wear and tear.

    • Eaton Fuller Manuals: The most common issues arise from driver abuse rather than mechanical failure. Missed gears and harsh shifting can damage synchronizers (in synchronized auxiliary sections) and gear dogs. Air system issues are also common; the pneumatic shift modules (range and splitter valves) rely on clean, dry air. If the truck's air dryer fails and moisture enters the system, the air valves on the transmission can stick, preventing the truck from shifting between high and low ranges.
    • Allison Automatics: For the heavy-duty automatics, the most frequent issue is overheating during extended low-speed, high-load operations (like creeping up a logging road). If the fluid overheats, its life is significantly reduced. Electrical issues, such as chafed wiring harnesses near the transmission control module (TCM), can also trigger limp-mode conditions.

    Proper fluid maintenance is your first line of defense against these heavy-duty headaches. If you need assistance servicing your rig or diagnosing a drivetrain issue, do not leave it to chance. Find a trusted shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2024 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-29.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email