2024 Kenworth W900 Bulb Size Guide & Replacement Tips
A complete ASE-certified master technician's guide to lighting on the 2024 Kenworth W900.
Working on this 2024 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
As an ASE-certified master technician, I’ve worked on countless heavy-duty trucks, and the iconic Kenworth W900 is one of my favorites. For the 2024 model year, the W900 continues to blend its classic, long-hood heritage with modern technology. While many fleets and owner-operators opt for the factory LED lighting packages, the base and traditional configurations still utilize standard, universally replaceable bulb sizes and sealed beam units.
If you're looking to maintain, repair, or upgrade the lighting on your 2024 Kenworth W900, this comprehensive guide covers the bulb sizes and specifications you need.
Quick reference
Note: Heavy-duty trucks are highly customizable. Your 2024 W900 may be equipped with full factory LED sealed units or traditional replaceable halogen/incandescent bulbs depending on how it was spec'd from the dealer.
| Location | Bulb Size | Type |
|---|---|---|
| Headlight (Low/High Beam) | H6054 (or 5x7 / 7x6 Sealed LED) | Halogen Sealed Beam / LED |
| Fog Light | H3 (or Sealed LED assembly) | Halogen / LED |
| Daytime Running Light (DRL) | Integrated with Low Beam | Halogen / LED |
| Front Turn Signal | 1157 / 3157 (or LED Pedestal) | Incandescent / LED |
| Rear Turn Signal | 4-inch Round (1157 / Sealed LED) | Incandescent / LED |
| Brake Light | 4-inch Round (1157 / Sealed LED) | Incandescent / LED |
| Tail Light | 4-inch Round (1157 / Sealed LED) | Incandescent / LED |
| Reverse Light | 1156 / 4-inch Round Sealed LED | Incandescent / LED |
| License Plate | 194 or Sealed LED | Incandescent / LED |
| Side Marker / Cab Clearance | 194 / 1156 or Sealed LED | Incandescent / LED |
| Interior Dome / Map | 211-2 / 194 | Incandescent / LED |
LED vs halogen upgrade considerations
The W900 is a classic, but standard halogen H6054 sealed beam headlights leave a lot to be desired during late-night hauling. Upgrading to 5x7 (also known as 7x6) LED sealed beams is one of the most common and effective modifications owner-operators make.
When upgrading to LED on a 2024 W900:
- Plug-and-Play Headlights: Most aftermarket 5x7 LED headlights feature a standard H4 plug, which directly connects to the W900's factory wiring harness without the need for complex adapters.
- Flasher Relays: If you are swapping standard incandescent 1157 front pedestal turn signals or rear 4-inch round tail lights to LEDs, you may experience hyper-flashing. You will likely need to install a heavy-duty, LED-compatible flasher relay in the fuse panel to normalize the blink rate.
- Heated LEDs: If you haul in winter conditions, consider buying heated LED headlights. Traditional halogens melt snow and ice, but standard LEDs run cold and can ice over, blinding you during a storm.
How to replace each bulb
Headlights (Low and High Beam): The W900 uses external headlight buckets. To replace the H6054 sealed beam or install a new LED unit, remove the stainless steel or chrome retaining ring (usually held in by a few Phillips head screws). Pull the light forward, unplug the H4 connector, and plug in the new unit. Ensure the "TOP" orientation is correct before reinstalling the bezel.
Front Turn Signals: These are typically housed in fender-mounted pedestal lights. Remove the amber lens by unscrewing the retaining screws, push in, and twist the 1157 or 3157 bulb to remove it. If the entire pedestal is a sealed LED unit, you will need to unbolt the housing from the fender and disconnect the wiring harness beneath the hood.
Cab Clearance and Side Markers: For incandescent fixtures, simply unscrew the amber or red lens to access the 194 or 1156 bulb. Push and twist (or pull straight out for the 194) to replace. Keep a tube of dielectric grease handy to prevent corrosion, which is very common on roof lighting.
Rear Brake, Turn, and Reverse Lights: Most W900 tail light panels use standard heavy-duty 4-inch round grommet-mounted lights. To replace these, gently pry the sealed light unit out of the rubber grommet with a flathead screwdriver. Unplug the 3-prong pigtail connector and push the new light into the grommet.
Interior Dome / Map Lights: Depending on your sleeper cab configuration, the interior lights can be accessed by carefully prying off the plastic covers with a trim tool. Replace the festoon (211-2) or wedge (194) bulbs with LEDs for much better visibility during your rest periods.
Common lighting issues for this generation
Even on a brand-new 2024 Kenworth, heavy-duty applications put a massive strain on electrical systems. The most common lighting issues on the W900 stem from vibration and weather exposure.
- Corroded Grounds: If a turn signal or tail light is acting erratically (e.g., dimming when the brakes are applied), you likely have a bad ground connection at the frame or behind the light panel.
- Moisture in Clearance Lights: Roof cab lights are notorious for taking on water. If a bulb blows prematurely, check the lens gasket.
- Chafed Wiring: The classic hood design means wiring harnesses route along the tilt hinges. Over time, inspect the harness at the hood hinge points for chafing, which can short out headlights and front turn signals.
Maintaining your rig's lighting is not just a matter of DOT compliance; it's essential for your safety on the road. If you're dealing with complex electrical gremlins or want professional installation of high-output LED lighting, get expert help. Find a trusted shop on Repairius.
Need service on your Kenworth W900?
Your vehicle and question are already filled in — just add your location.
More specs for the 2024 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-20.