2019 Honda Accord Wheel Alignment Specifications
Factory alignment ranges and expert advice for your 2019 Honda Accord.
Working on this 2019 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | -0.5° | -1.0° to 0.0° | -0.5° | -1.0° to 0.0° |
| Caster | 7.0° | 6.5° to 7.5° | Not Applicable | Not Applicable |
| Total Toe | 0.0° | -0.08° to 0.08° | 0.0° | -0.16° to 0.16° |
| Individual Toe | 0.0° | -0.04° to 0.04° | 0.0° | -0.08° to 0.08° |
| SAI | 14.0° | 13.5° to 14.5° | Not Applicable | Not Applicable |
| Thrust Angle | Not Applicable | Not Applicable | 0.0° | -0.15° to 0.15° |
Adjustability
On the 2019 Honda Accord, front and rear toe are factory adjustable. This means a technician can set these angles to the preferred specification within the acceptable range during a standard alignment. Front camber and caster, however, are non-adjustable from the factory. If these angles are out of specification, it typically indicates a bent suspension component or worn bushings. Rear camber is also non-adjustable from the factory and usually points to similar issues if out of spec.
Recommended adjustment hardware
For the 2019 Honda Accord, if front or rear camber is found to be outside the factory specifications and no bent components are identified, aftermarket camber correction kits are available. These often include specialty camber bolts or eccentric bushings that replace original equipment to allow for adjustment. Similarly, aftermarket caster kits might be available to correct front caster if it's out of spec due to minor suspension variations or if custom alignment settings are desired for performance applications. It's important to use high-quality, reputable brands for any aftermarket alignment hardware to ensure durability and proper functionality.
Symptoms of bad alignment
Misaligned wheels can manifest in several ways, often impacting tire wear, handling, and fuel economy. Here are some common symptoms:
- Uneven Tire Wear: This is the most common indicator. Different alignment issues cause distinct wear patterns:
- Feathering: This occurs when the tire tread is smooth on one side and sharp on the other, indicating excessive toe-in or toe-out. It feels like running your hand across the tire tread in one direction is smooth, but in the opposite direction it catches.
- Camber Wear (one-sided wear): If the inside or outside edge of the tire is significantly more worn than the rest of the tread, it points to excessive negative or positive camber, respectively.
- Cupping or Scalloping: While sometimes related to worn suspension components (shocks/struts), irregular cupping patterns across the tire tread can also be exacerbated by alignment issues.
- Vehicle Pulling: If your Honda Accord consistently pulls to one side when driving on a flat, straight road, it's a strong sign of an alignment problem, likely related to camber or caster differences between the front wheels.
- Steering Wheel Not Centered: Even when driving straight, if your steering wheel is noticeably off-center, an alignment is needed.
- Loose or Wandering Steering: The vehicle may feel unstable or require constant steering corrections to stay in a straight line.
- Squealing Tires: While often a sign of aggressive driving, squealing tires during normal turns can sometimes indicate a toe issue.
When to align
It's recommended to have your 2019 Honda Accord's alignment checked in several situations:
- After Suspension or Steering Component Replacement: Any time components like tie rods, control arms, ball joints, or struts/shocks are replaced, an alignment is mandatory.
- After Installing New Tires: To ensure maximum tire life and optimal performance, an alignment should be performed after new tires are mounted.
- After Hitting a Curb or Pothole: If you experience a significant impact with a curb, pothole, or other road hazard, it can easily knock your alignment out of spec.
- When Noticing Alignment Symptoms: If you observe any of the symptoms mentioned above, such as uneven tire wear or pulling, get an alignment check promptly.
- Every 15,000-20,000 Miles or Annually: Even without specific symptoms, a preventative alignment check can catch minor issues before they become major problems and help prolong tire life.
Typical alignment cost
The typical cost for a wheel alignment on a 2019 Honda Accord can vary depending on your location, the type of shop (independent vs. dealership), and whether any special adjustments or parts are needed. Generally, you can expect to pay anywhere from $80 to $150 for a standard four-wheel alignment. If aftermarket correction kits are required or if there are seized components that need extra labor to adjust or replace, the cost could be higher. Always ask for a detailed quote before authorizing any work.
Find a trusted alignment shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2019 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.