Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2019 Honda Accord: Brake Pad & Rotor Specifications

    Everything on this vehicle

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2019 Honda Accord

    Caliper Bracket Torque
    80 ft-lbs (108 Nm)
    Caliper Slide-Pin Torque
    25 ft-lbs (34 Nm)

    From the table below. Confirm with your owner's manual for your exact engine.

    As an ASE-certified master technician, I’ve seen firsthand how proper brake maintenance is crucial for the safety and performance of your vehicle. This guide provides detailed brake specifications for the 10th generation 2019 Honda Accord, helping you or your trusted mechanic get the job done right.

    Quick Reference: 2019 Accord Brake Specs

    Note that the 2019 Honda Accord uses different brake components depending on the powertrain. The 2.0T and Hybrid models are equipped with larger front rotors and corresponding larger pads and calipers compared to the more common 1.5T models. Rear components are typically the same across all trims. Always verify part numbers and specifications with your VIN before purchasing parts.

    SpecificationFront Brakes (1.5T Models)Front Brakes (2.0T/Hybrid Models)Rear Brakes (All Models)
    OEM Pad P/NVerify with dealer.Verify with dealer.43022-TVA-A01 or similar.
    Akebono Pad P/NACT1931ASP2035ACT1428A
    Bosch Pad P/NBC1931BC2035BC1428A
    Wagner Pad P/NQC1931QC2035QC1428A
    Power Stop Pad P/NZ23-1931Z23-2035Z23-1428A
    Rotor Diameter293 mm (11.5 in)312 mm (12.3 in)282 mm (11.1 in)
    Rotor New Thickness25 mm25 mm9 mm
    Rotor Minimum Thickness23 mm23 mm8 mm
    Caliper Piston CountSingle PistonSingle PistonSingle Piston (w/ EPB)
    Caliper Bracket Torque80 ft-lbs (108 Nm)80 ft-lbs (108 Nm)51 ft-lbs (69 Nm)
    Caliper Slide-Pin Torque25 ft-lbs (34 Nm)25 ft-lbs (34 Nm)17 ft-lbs (23 Nm)
    Brake Fluid SpecHonda Heavy Duty DOT 3Honda Heavy Duty DOT 3Honda Heavy Duty DOT 3

    How to Choose Pads

    Choosing the right brake pad compound is a balance of performance, noise, dust, and longevity.

    • Ceramic Pads: For the vast majority of Accord owners, a quality ceramic pad (like the Akebono Pro-ACT or Bosch QuietCast) is the ideal choice. These were the original equipment type for your car. They offer quiet, smooth operation, produce very little visible dust, and are gentle on your rotors. This is the go-to for daily commuting and typical family use.
    • Semi-Metallic Pads: If you have a more aggressive driving style or live in a hilly area, a semi-metallic pad might be a better fit. These pads contain steel fibers that offer a stronger "bite" and dissipate heat more effectively, reducing the chance of brake fade during heavy use. The trade-off is more brake dust on your wheels, a higher potential for noise, and faster rotor wear.
    • Performance / Heavy-Duty (HD) Pads: Brands like Power Stop (Z23, Z26) offer performance-oriented hybrid ceramic/carbon-fiber pads. These are for the enthusiast driver who prioritizes stopping power above all else. They provide the highest resistance to brake fade and the strongest bite, but can be noisy and dusty when cold and will wear rotors more quickly than other compounds.

    Typical Service Life

    The lifespan of your brakes depends heavily on your driving habits and environment.

    • Pads: Most 2019 Accord owners can expect to get between 35,000 and 60,000 miles out of a set of brake pads. Aggressive city driving will result in a shorter lifespan, while gentle highway commuting can extend it significantly.
    • Rotors: It's best practice to either resurface or replace your rotors every time you replace your pads. Attempting a "pad-slap," where new pads are installed on old, worn rotors, can lead to brake judder, vibration, and reduced stopping performance. Given the relatively low cost of new rotors, replacement is almost always the recommended route. Most quality rotors will last through two sets of pads if you must reuse them, but they must be measured to ensure they are well above the minimum thickness specification.

    Common Brake Issues for This Generation

    The 10th generation Accord has a sophisticated and reliable brake system, but there is one major consideration for any DIYer or technician: the Electronic Parking Brake (EPB).

    Unlike older cars with a mechanical handbrake, the rear calipers on your Accord are controlled by electric motors. You cannot simply use a C-clamp or piston tool to compress the rear caliper piston. Attempting to do so will damage the caliper's internal motor, resulting in a costly repair.

    To safely replace the rear pads, the EPB system must be put into "Brake Pad Maintenance Mode." This procedure retracts the piston electronically. It can be done with a compatible bi-directional OBDII scan tool. If you do not have such a tool, this is a job best left to a professional shop.

    Brake Job Cost Estimate

    Costs can vary based on your location and the quality of parts used.

    • DIY Parts Cost: For a DIYer, expect to pay between $150 and $250 for a set of high-quality pads and new rotors for a single axle (either front or rear).
    • Independent Shop Cost: At a trusted independent repair shop, a front or rear brake job (including parts and labor) will typically cost between $400 and $650 per axle.
    • Dealership Cost: A dealership service will generally be the most expensive option, often ranging from $600 to $900+ per axle, using OEM parts. A full four-wheel brake job at a dealership could exceed $1,200.

    Properly maintained brakes are essential. Whether you do it yourself or use a professional, using quality parts and correct procedures will ensure your 2019 Honda Accord stops safely for many tens of thousands of miles.

    Find a trusted brake shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-29.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email