Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2019 Honda Accord: Transmission & Axle Gear Ratios

    Everything on this vehicle

    An expert guide to the 2019 Honda Accord's transmission and final drive

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2019 Honda Accord

    3.24
    2.0L Turbo with 10-Speed Automatic
    2.22
    1.5L Turbo with CVT
    4.11
    1.5L Turbo with 6-Speed Manual
    3.48
    2.0L Turbo with 6-Speed Manual

    From the table below. Confirm with your owner's manual for your exact engine.

    Transmission Gear Ratios

    The 2019 Honda Accord offers three distinct transmission options, each mated to specific engines. The choice between a Continuously Variable Transmission (CVT), a traditional 10-speed automatic, or a slick-shifting 6-speed manual significantly impacts the car's driving dynamics and fuel efficiency.

    10-Speed Automatic (2.0T Engine)

    Found exclusively on models with the 2.0-liter turbocharged engine, this advanced 10-speed automatic provides a wide spread of ratios to deliver both brisk acceleration and quiet, efficient highway cruising. Its high number of gears ensures the engine is always in its optimal powerband.

    GearRatio
    1st5.253
    2nd3.267
    3rd2.298
    4th1.705
    5th1.341
    6th1.000
    7th0.796
    8th0.652
    9th0.584
    10th0.523
    Reverse4.008

    Continuously Variable Transmission (CVT) (1.5T Engine)

    Paired with the efficient 1.5-liter turbocharged engine, the CVT does not have traditional fixed gears. Instead, it uses a belt-and-pulley system to create a continuous range of effective gear ratios. This allows the engine to operate at its most efficient RPM for a given speed, maximizing fuel economy. The ratios listed below represent the lowest and highest range of operation.

    GearRatio Range
    Forward2.645 - 0.405
    Reverse1.859 - 0.479

    6-Speed Manual (1.5T and 2.0T Sport Trims)

    For driving purists, Honda offered a 6-speed manual transmission on the Sport trims for both the 1.5T and 2.0T engines. The ratios were tailored slightly differently between the two engines to match their unique power curves.

    For 1.5T Engine:

    GearRatio
    1st3.643
    2nd2.080
    3rd1.360
    4th1.024
    5th0.830
    6th0.686
    Reverse3.673

    For 2.0T Engine:

    GearRatio
    1st3.533
    2nd1.955
    3rd1.303
    4th0.975
    5th0.778
    6th0.628
    Reverse3.673

    Available Axle Ratios

    For a front-wheel-drive vehicle like the Honda Accord, the term "axle ratio" is synonymous with the final drive ratio. This gear is located within the transaxle and multiplies the torque coming from the transmission one last time before it is sent to the wheels. Unlike trucks, which may offer multiple axle ratios for towing or efficiency, the 2019 Accord has a single, fixed final drive ratio for each powertrain combination.

    Final Drive RatioAvailable With
    3.242.0L Turbo with 10-Speed Automatic
    2.221.5L Turbo with CVT
    4.111.5L Turbo with 6-Speed Manual
    3.482.0L Turbo with 6-Speed Manual

    How to Identify Your Axle Ratio

    Identifying the specific final drive ratio in your 2019 Accord is straightforward since it's tied directly to the engine and transmission, but it differs from methods used on domestic trucks. The concepts of a door-jamb RPO sticker (General Motors) or a physical tag on the rear axle differential (Ford/Ram) do not apply to the Honda Accord.

    • By Powertrain: The easiest method is to identify your engine (1.5T or 2.0T) and transmission (CVT, 10-Speed Auto, or 6-Speed Manual). Using the table above, you can immediately determine your final drive ratio.
    • VIN Decoder: A vehicle identification number (VIN) decoder service can provide a detailed build sheet for your specific car, which will list the transmission type and corresponding final drive ratio.
    • Transaxle Code: The transaxle housing itself has an identification sticker or stamping. This code can be cross-referenced with a Honda service database to confirm the specific model and its internal gearing, including the final drive.

    Towing vs. MPG Impact

    It is critical to note that Honda does not approve or provide a tow rating for the 2019 Accord in North America. Towing with the vehicle is not recommended and could void the warranty.

    However, the principles of gear ratios still apply to the car's performance characteristics:

    • Fuel Economy: The 1.5T with the CVT and its very low 2.22 final drive ratio is the fuel economy champion. The combination of the CVT's efficiency and the low final drive allows the engine to spin at a very low RPM during highway cruising, conserving fuel.
    • Acceleration & Performance: The 1.5T with the 6-Speed Manual has a numerically high 4.11 final drive ratio. This acts as a "torque multiplier," providing much quicker acceleration from a stop compared to its CVT counterpart, though at the expense of higher engine RPM at highway speeds. Similarly, the powerful 2.0T paired with the 10-speed auto uses its wide array of internal gears and a balanced 3.24 final drive to deliver powerful acceleration without excessively compromising fuel economy.

    Common Issues

    While the 2019 Accord is a very reliable vehicle, a few points of interest related to the driveline are worth noting for high-mileage examples.

    • CVT Fluid Service: The longevity of a Continuously Variable Transmission is highly dependent on clean fluid. Honda specifies regular intervals for draining and filling the CVT with HCF-2 fluid. Delaying this service can lead to hesitation, shuddering, or premature wear of the belt and pulleys.
    • 10-Speed Shifting Behavior: Some owners have reported occasional harsh or busy shifts from the 10-speed automatic, particularly at low speeds. In many cases, this is normal behavior as the transmission's logic learns driving habits or works to optimize efficiency. Software updates from the dealer have been issued to address some of these drivability concerns.

    For any concerns about your vehicle's transmission or driveline performance, it's best to consult a professional.

    Find a driveline shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email