Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission Fluid & Service

    2019 Honda Accord Transmission Fluid & Service

    Everything on this vehicle

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Transmission Make/Model: Depends on engine:
      • 1.5L Turbo: Honda LL-CVT (Continuously Variable Transmission)
      • 2.0L Turbo: Honda 10-Speed Automatic (ZF-derived, Honda-built)
    • OEM Fluid Spec:
      • LL-CVT: Honda HCF-2 Continuously Variable Transmission Fluid
      • 10-Speed Automatic: Honda ATF-Type 3.1
    • Drain & Fill Capacity:
      • LL-CVT: Approximately 3.7 US quarts (3.5 liters)
      • 10-Speed Automatic: Approximately 4.4 US quarts (4.2 liters)
    • Full Overhaul Capacity:
      • LL-CVT: Approximately 7.5 US quarts (7.1 liters)
      • 10-Speed Automatic: Approximately 9.8 US quarts (9.3 liters)
    • Filter OEM Part Number:
      • LL-CVT: Internal, generally not serviceable independently. Verify with dealer or service manual.
      • 10-Speed Automatic: Internal, generally not serviceable independently. Verify with dealer or service manual.
    • Recommended Service Interval:
      • Normal Duty: Every 60,000 miles or 3 years (refer to Maintenance Minder B3 service code).
      • Severe Duty / Towing: Every 30,000 miles or 1.5 years (refer to Maintenance Minder B3 service code more frequently).

    Fluid Type Explained

    For the 2019 Honda Accord, the proper transmission fluid is critical and depends entirely on the engine your vehicle is equipped with. Honda engineers their transmissions to operate with specific fluid formulations to ensure optimal performance, longevity, and fuel economy. Using the wrong fluid can lead to premature wear, poor shifting, and even catastrophic transmission failure.

    • For 1.5L Turbo Models (LL-CVT Transmission): These models utilize a Continuously Variable Transmission (CVT). Unlike traditional automatics, CVTs do not have fixed gears but instead use a belt and pulley system to provide a continuous range of gear ratios. This design demands a very specific fluid: Honda HCF-2 Continuously Variable Transmission Fluid. HCF-2 (Honda CVT Fluid-2) is specially formulated to provide the necessary friction properties for the CVT's belt and pulleys, ensuring smooth operation, preventing slippage, and protecting internal components from wear. Do NOT use standard automatic transmission fluid (ATF) or any other CVT fluid not specifically recommended by Honda, as this will lead to severe damage.

    • For 2.0L Turbo Models (10-Speed Automatic Transmission): These models are paired with an advanced 10-speed automatic transmission. This is a conventional geared automatic, albeit a highly sophisticated one. The correct fluid for this transmission is Honda ATF-Type 3.1. This fluid is engineered to meet the precise lubrication, friction, and heat dissipation requirements of this multi-speed gearbox, ensuring smooth shifts, efficient power transfer, and long-term durability. Again, never substitute with generic ATF or fluids not explicitly approved by Honda.

    Always verify the correct fluid type with your owner's manual or a Honda dealership using your VIN.

    Service Procedure

    Two primary methods exist for changing transmission fluid: a drain and fill or a full fluid exchange (flush).

    • Drain & Fill: This is the most common and Honda-recommended procedure for routine maintenance. It involves draining the fluid from the transmission pan and refilling it with new fluid. It's important to understand that a drain and fill only replaces a portion of the total transmission fluid (as indicated by the "drain & fill capacity" above). A significant amount of old fluid remains in the torque converter and other internal passages. For this reason, some technicians recommend performing two or three consecutive drain and fills (driving briefly between each) to dilute the old fluid more effectively. This method is generally sufficient when performing services at recommended intervals.

    • Full Fluid Exchange (Flush): A full fluid exchange involves using specialized equipment to push new fluid through the transmission, forcing out all the old fluid. While this replaces nearly 100% of the fluid, it is not typically recommended by Honda for many of their transmissions, especially older ones, due to potential issues with dislodging contaminants. For modern Honda transmissions like those in the 2019 Accord, if a full exchange is deemed necessary (e.g., after severe overheating or contamination), it should only be performed by a reputable shop that understands Honda's specific procedures and uses Honda-approved equipment and fluids. Incorrect flushing can cause more harm than good.

    For both transmission types in the 2019 Accord, the transmission filter is generally an internal component and not designed for routine replacement. It typically only requires attention during a major transmission overhaul. Always verify the fluid level carefully after a drain and fill, following the procedure outlined in your owner's manual (typically checking with the engine warm and running, on level ground).

    Service Interval

    Honda vehicles utilize a "Maintenance Minder" system that provides service codes (e.g., A1, B3) indicating when various maintenance items are due. The transmission fluid service is typically part of the "B3" service code.

    • Normal Duty: For most drivers under normal conditions, Honda recommends changing the transmission fluid approximately every 60,000 miles or 3 years, whichever comes first. This aligns with the Maintenance Minder B3 service. Regular fluid changes are crucial for maintaining the operational integrity of both CVT and 10-speed automatic transmissions.

    • Severe Duty / Towing: If you frequently drive in severe conditions, such as:

      • Stop-and-go city driving in hot weather
      • mountainous terrain
      • Heavy loads or towing (even though the Accord is not primarily a tow vehicle, occasionally hauling heavy utility trailers can constitute severe duty)
      • Frequent short trips in extremely cold weather ...it is highly recommended to shorten the service interval to approximately 30,000 miles or 1.5 years. Severe conditions put added stress and heat on the transmission fluid, causing it to degrade faster. More frequent fluid changes will help ensure maximum transmission lifespan.

    Common Transmission Problems (2018-2022 Honda Accord Generation)

    The transmissions in the 10th generation (2018-2022) Honda Accord are generally robust when properly maintained. However, as with any complex mechanical component, some issues can arise:

    • CVT Models (1.5L Turbo): While generally reliable, CVTs can sometimes exhibit:

      • "Rubber Band" Effect: A slight delay between pressing the accelerator and the engine RPMs increasing, then catching up. This is often a characteristic of CVTs but can become more pronounced if the fluid is old or low.
      • Vibrations or Judder: Especially at lower speeds or during light acceleration. This can be indicative of worn CVT fluid or, in more severe cases, internal component wear.
      • Whining or Groaning Noises: Can indicate pump issues or bearing wear within the CVT unit.
    • 10-Speed Automatic (2.0L Turbo): This is a sophisticated unit, and while generally smooth, some users have reported:

      • Rough or Hesitant Shifts: Particularly between lower gears. This can sometimes be resolved with a software update from Honda or a fluid change if the fluid is degraded.
      • Delayed Engagement: A slight pause when shifting into drive or reverse from park. Less common, but worth noting.
      • Unusual Noises: Clunking or grinding noises are always a cause for immediate inspection, as they could indicate internal mechanical issues.

    For both transmission types, ensuring the correct fluid is used and serviced at the appropriate intervals is the best preventative measure against these potential issues. Any unusual behavior should be promptly diagnosed by a qualified technician.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email