2019 Honda Accord Fluid Specifications & Capacities
A master technician's complete guide to the factory-spec fluids and capacities for the 10th-generation Honda Accord.
Working on this 2019 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer — 2019 Honda Accord
- Engine Coolant
- 1.35 – 1.83 gal (verify in owner's manual)
- Transmission Fluid (Manual - 6MT)
- 2.0 qts (drain and refill)
- Transmission Fluid (Hybrid e-CVT)
- 2.3 qts (drain and refill)
- Brake Fluid
- ~1.0 qt (flush)
From the table below. Confirm with your owner's manual for your exact engine.
As an ASE-certified master technician, I regularly see the long-term effects of using the wrong fluids in modern vehicles. The 10th-generation Honda Accord, introduced in 2018 and carried into 2019, features highly advanced powertrains. Whether you are servicing the 1.5L turbocharged engine, the robust 2.0L turbo, or the highly efficient 2.0L Hybrid, sticking to Honda's factory specifications is absolutely critical. Modern components like the 10-speed automatic transmission and the EarthDreams continuously variable transmission (CVT) have extremely tight tolerances and require exact OEM fluid formulas to function correctly and avoid catastrophic failure.
Below is your complete guide to the factory-spec fluids for the 2019 Honda Accord.
Quick reference
| Fluid | Type/Spec | Capacity |
|---|---|---|
| Engine Oil (1.5L Turbo) | 0W-20 (API SN/SP, ILSAC GF-6A) | 3.7 qts (with filter) |
| Engine Oil (2.0L Turbo) | 0W-20 (API SN/SP, ILSAC GF-6A) | 5.0 qts (with filter) |
| Engine Oil (2.0L Hybrid) | 0W-20 (API SN/SP, ILSAC GF-6A) | 4.0 qts (with filter) |
| Engine Coolant | Honda Long Life Antifreeze/Coolant Type 2 (Blue) | 1.35 – 1.83 gal (verify in owner's manual) |
| Transmission Fluid (CVT - 1.5L) | Honda HCF-2 Transmission Fluid | 3.9 qts (drain and refill) |
| Transmission Fluid (10AT - 2.0L) | Honda ATF Type 2.0 | 4.5 qts (drain and refill) |
| Transmission Fluid (Manual - 6MT) | Honda Manual Transmission Fluid (MTF) | 2.0 qts (drain and refill) |
| Transmission Fluid (Hybrid e-CVT) | Honda ATF DW-1 | 2.3 qts (drain and refill) |
| Brake Fluid | Honda Heavy Duty Brake Fluid DOT 3 | ~1.0 qt (flush) |
| Power Steering Fluid | N/A (Electric Power Steering) | N/A |
| Washer Fluid | Standard Washer Fluid | ~2.6 - 4.2 qts |
(Note: The 2019 Honda Accord is a front-wheel-drive gasoline/hybrid vehicle. It does not have a transfer case, front/rear differentials that require separate gear oil, or a diesel engine requiring DEF).
Engine Oil
For all 2019 Honda Accord models—the 1.5L turbo, 2.0L turbo, and the 2.0L Hybrid—Honda requires 0W-20 full synthetic engine oil that meets API Certification Seal (currently API SP, which supersedes the API SN spec originally printed in the 2019 manual). The oil should also meet ILSAC GF-6A standards to protect against Low-Speed Pre-Ignition (LSPI), which is highly relevant for the turbocharged engines.
Intervals and Pitfalls: Always follow the Honda Maintenance Minder system, which will display a code (usually "A" or "B") when it is time to change the oil based on your driving habits. Generally, this falls between 5,000 and 7,500 miles. A critical pitfall: Never use conventional oil or a thicker viscosity like 5W-30 unless it is a dire emergency, as the Variable Timing Control (VTC) actuators and tight bearing clearances are designed specifically for 0W-20. Additionally, for the 1.5L turbo engine, ensuring you reach full operating temperature on your drives is important to prevent fuel dilution in the engine oil.
Engine Coolant
The only acceptable coolant for the 2019 Honda Accord is Honda Long Life Antifreeze/Coolant Type 2. This is a pre-mixed (50/50) Organic Acid Technology (OAT) coolant that is dyed blue. It is free of silicates and borates, which helps protect the aluminum components and water pump seals.
Intervals and Pitfalls: The Maintenance Minder will usually flag a coolant change at roughly 100,000 miles or 10 years, and every 50,000 miles or 5 years thereafter. A critical pitfall: Never mix Honda Type 2 (Blue) with older green coolants, universal "all-makes-all-models" coolants, or HOAT (Hybrid OAT) coolants. Mixing coolant types can cause the corrosion inhibitors to drop out of suspension, leading to gel formation, clogged heater cores, and premature water pump failure.
Transmission Fluid
Transmission fluid is where you must be the most careful with the 2019 Accord, as there are four entirely different transmissions available, each requiring a specific fluid.
- 1.5L Turbo (CVT): Requires Honda HCF-2. Do not mix this with older Honda CVT fluid (CVTF) or standard ATF. Using the wrong fluid in this CVT will cause catastrophic belt slippage and destroy the transmission in very short order.
- 2.0L Turbo (10-Speed Auto): Requires Honda ATF Type 2.0. This is an ultra-low viscosity fluid specifically formulated for the planetary gearsets and clutch packs of Honda's in-house 10-speed transmission. Never use older Honda ATF-Z1 or DW-1 here.
- Hybrid (e-CVT): Requires Honda ATF DW-1. Interestingly, the Hybrid's e-CVT does not use a traditional belt-and-pulley CVT setup; it uses electric motors and a lock-up clutch, which is why it utilizes Honda's standard automatic transmission fluid (DW-1) rather than HCF-2.
- 6-Speed Manual: Requires Honda Manual Transmission Fluid (MTF).
Intervals and Pitfalls: Transmission fluids should typically be drained and filled every 30,000 to 60,000 miles depending on severe vs. normal driving conditions. A critical pitfall: Never use a "universal ATF" or "universal CVT" fluid in these transmissions. The friction modifiers are highly specific to Honda's clutch materials and belt designs. Always use the genuine Honda fluid.
Brake Fluid
Honda specifies Honda Heavy Duty Brake Fluid DOT 3. While any high-quality DOT 3 brake fluid will work safely, Honda recommends their own formulation to prevent corrosion in the ABS/VSA modulator internals. You can safely use a DOT 4 fluid if DOT 3 is unavailable, but you should not mix them excessively, and you must never use DOT 5 (silicone-based) fluid, as it is strictly incompatible with the Accord's braking system.
Intervals and Pitfalls: Honda uniquely recommends replacing the brake fluid every 3 years regardless of mileage. Brake fluid is hygroscopic, meaning it absorbs moisture from the air. Moisture lowers the boiling point of the fluid, leading to a spongy pedal under heavy braking, and causes internal rust in the brake lines and calipers.
Power Steering Fluid
The 2019 Honda Accord is equipped with Electric Power Steering (EPS). There is no power steering pump, no power steering hoses, and therefore no power steering fluid to check, top off, or replace.
Washer Fluid
You can use any standard off-the-shelf windshield washer fluid. In colder climates, ensure you are using a winter-blend fluid rated for sub-zero temperatures to prevent the fluid from freezing and cracking the washer fluid reservoir or the internal pump.
Proper maintenance using the correct fluids is the single most effective way to ensure your 2019 Honda Accord reaches 200,000 miles and beyond without major mechanical failures. If you are ever unsure about a fluid specification, always verify in your owner's manual or OEM service info.
Find a trusted shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2019 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-18.