Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Coolant Capacity & Type

    2019 Honda Accord Coolant Capacity & Type

    Everything on this vehicle

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2019 Honda Accord Coolant Capacity & Type

    Your 2019 Honda Accord holds approximately 6.9 to 7.2 quarts (6.5 to 6.8 liters) of coolant in its cooling system, depending on the engine.

    Quick Answer

    • Total Cooling System Capacity: 6.9 - 7.2 quarts (6.5 - 6.8 liters)
    • OEM Coolant Spec: Honda Long-Life Antifreeze/Coolant Type 2 (Blue, P-OAT)
    • Mix Ratio: 50/50 Pre-Diluted

    Capacity by Engine Option

    The coolant capacity for your 2019 Honda Accord can vary slightly based on the installed engine:

    Engine TypeApproximate Capacity (Quarts)Approximate Capacity (Liters)
    1.5L L4 Turbo6.96.5
    2.0L L4 Turbo7.26.8

    Always consult your owner's manual for the most precise figures for your specific vehicle.

    Flush Interval

    Honda recommends specific coolant flush intervals to ensure the longevity and efficiency of your cooling system:

    • Normal Duty: The initial coolant flush is recommended at 120,000 miles or 10 years, whichever comes first. Subsequent flushes are then recommended every 60,000 miles or 5 years, whichever comes first.
    • Severe Duty: If your 2019 Honda Accord is regularly operated under severe conditions (e.g., extensive towing, extreme temperatures, mountainous driving, or heavy stop-and-go traffic), it's advisable to shorten these intervals. Consider flushing your coolant every 60,000 miles or 5 years for the initial service, and every 30,000 miles or 2-3 years thereafter.

    Regularly checking your coolant level and condition between flushes is always recommended.

    How to Refill & Bleed

    Properly refilling and bleeding your 2019 Honda Accord's cooling system is crucial to prevent air pockets that can cause overheating. Here's a general procedure:

    1. Safety First: Ensure the engine is completely cool before starting. Wear appropriate personal protective equipment, such as gloves and eye protection.
    2. Drain the Old Coolant: Place a drain pan under the radiator drain plug and open it. Remove the radiator cap to allow the system to drain completely.
    3. Flush (Optional but Recommended): If performing a full flush, close the drain plug, fill the system with distilled water, run the engine with the heater on until warm, then drain again. Repeat until the drained water is clear. (Always use distilled water for flushing and mixing).
    4. Close Drain Plug: Securely close the radiator drain plug.
    5. Refill with New Coolant: Slowly fill the radiator with the Honda Long-Life Antifreeze/Coolant Type 2 (pre-diluted 50/50). Fill the reservoir to the MAX line.
    6. Bleeding Procedure:
      • Start the engine with the radiator cap off (or "burp" funnel installed, if available) and the heater set to maximum heat and fan speed.
      • Allow the engine to reach operating temperature. As the engine warms, air bubbles will escape.
      • Gently squeeze the upper and lower radiator hoses several times to help dislodge air pockets.
      • Maintain the coolant level in the radiator by adding more as needed until bubbles stop appearing.
      • On some Honda models, there is a bleeder bolt located near the thermostat housing or on an upper radiator hose, which can be opened slightly to release trapped air specifically from the cylinder head.
    7. Final Steps: Once no more bubbles appear, install the radiator cap and allow the engine to cool completely. Recheck the coolant level in the reservoir and top off if necessary. Monitor the coolant level over the next few drive cycles.

    If you're uncomfortable performing this procedure, or if you have a vacuum filler, it's recommended to let a professional handle it.

    Common Cooling System Issues for this Generation (2018-2022 Honda Accord)

    While the 2019 Honda Accord is generally reliable, some cooling system issues that can arise in this generation include:

    • Water Pump Leaks: Like many vehicles, the water pump can eventually develop leaks, often indicated by coolant seeping from the pump housing or a noticeable drop in coolant level.
    • Thermostat Issues: A faulty thermostat can lead to the engine running too hot (stuck closed) or taking excessively long to warm up (stuck open), impacting fuel economy and emissions.
    • Radiator Fan Problems: The electric cooling fans are crucial for maintaining proper engine temperature, especially in stop-and-go traffic. Issues can range from a blown fuse to a faulty fan motor or relay, leading to overheating.
    • Cracked Coolant Reservoirs/Hoses: Over time, plastic coolant reservoirs and rubber hoses can become brittle and crack, leading to coolant leaks. Regular inspection can help catch these early.
    • Head Gasket Leaks (Less Common, but Possible): While less common in newer Hondas, a failing head gasket can lead to coolant loss, white smoke from the exhaust, or coolant contamination with oil. Symptoms often include unexplained coolant loss, overheating, and rough engine operation.

    Regular maintenance and using the correct type of coolant are your best defenses against these issues.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email