Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2019 Honda Accord Oil Capacity & Filter

    Everything on this vehicle

    Everything you need to know about oil for your 2019 Honda Accord.

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2019 Honda Accord Oil Capacity & Filter: Your Complete Guide

    Your 2019 Honda Accord takes 3.7 quarts (3.5 liters) of 0W-20 engine oil for both the 1.5L and 2.0L turbocharged engines, including when replacing the oil filter.

    Quick Answer

    • Oil Capacity: 3.7 quarts (3.5 liters) with filter change.
    • Recommended Oil Weight: 0W-20
    • Oil Specification: API SN or higher (e.g., SP) / ILSAC GF-5 or higher (e.g., GF-6A)
    • OEM Oil Filter: Honda P/N 15400-PLM-A02 (or equivalent 15400-RTA-003, 15400-RTA-004)
    • Aftermarket Oil Filter Cross-References:
      • Fram: PH7317 or XG7317 ( масло синтетическая)
      • Wix: 51356
      • Mobil 1: M1-110

    Capacity by Engine Option

    EngineOil Capacity (with filter)
    1.5L Turbo I43.7 Quarts (3.5 Liters)
    2.0L Turbo I43.7 Quarts (3.5 Liters)

    Oil Change Interval

    Honda recommends using the Maintenance Minder system in your 2019 Accord to determine the optimal oil change interval. This system takes into account driving conditions, engine temperature, and other factors.

    • Normal Driving Conditions: Generally, the Maintenance Minder will indicate an oil change is due between 7,500 and 10,000 miles (12,000 – 16,000 km) or 12 months, whichever comes first.
    • Severe Driving Conditions: If you frequently drive in stop-and-go traffic, extreme temperatures, tow, or take short trips, the Maintenance Minder may recommend an oil change sooner, typically around 5,000 miles (8,000 km) or 6 months.

    Always rely on the Maintenance Minder display for the most accurate oil life remaining information.

    Drain Plug Torque

    The oil drain plug for both the 1.5L and 2.0L engines on the 2019 Honda Accord should be torqued to 29 lb-ft (39 N-m). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 94109-14000 (14mm).

    How to Change the Oil (Brief Steps)

    1. Warm up the engine to operating temperature, then shut it off.
    2. Locate the drain plug on the oil pan (passenger side, toward the front of the vehicle) and place a drain pan underneath.
    3. Remove the drain plug and allow the old oil to drain completely.
    4. Replace the crush washer on the drain plug and reinsert, tightening to 29 lb-ft (39 N-m).
    5. Locate and remove the old oil filter (typically on the front of the engine for the 1.5L, and near the exhaust manifold for the 2.0L).
    6. Apply a thin film of new oil to the gasket of the new oil filter.
    7. Install the new oil filter, tightening by hand until snug, then an additional 3/4 to 1 full turn (or according to filter manufacturer specifications).
    8. Refill the engine with 3.7 quarts of new 0W-20 engine oil.
    9. Start the engine and let it run for a few minutes to circulate the new oil. Check for leaks around the drain plug and oil filter.
    10. Shut off the engine, wait a few minutes for the oil to settle, then check the oil level on the dipstick and adjust if necessary.
    11. Reset the Maintenance Minder system.

    Common Issues / Tips for this Generation (2018-Present)

    • Oil Dilution (1.5L Turbo): Some 2019 1.5L turbocharged Honda Accords may experience oil dilution, where gasoline mixes with the engine oil. While Honda issued software updates to mitigate this for earlier models, it's still wise to monitor your oil level and smell for excessive gasoline. Regular oil changes with high-quality oil are crucial.
    • Maintenance Minder Accuracy: Trust the Maintenance Minder. It's a sophisticated system designed to optimize maintenance intervals for your specific driving habits. Don't automatically adhere to a fixed 3,000-mile interval if the Minder indicates otherwise.
    • Proper Oil Specification: Always use 0W-20 oil that meets API SN (or higher) and ILSAC GF-5 (or higher) standards. Using an incorrect oil weight or specification can negatively impact fuel economy and engine longevity, especially with turbocharged engines.
    • Oil Filter Placement (2.0L Turbo): The oil filter on the 2.0L turbocharged engine can be a bit more challenging to access than on the 1.5L, being located higher up near the exhaust manifold. A cap-style oil filter wrench is highly recommended.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email