Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Bulb Sizes (Headlight, Tail, Fog)

    2019 Honda Accord Bulb Sizes: Headlight, Tail, Fog & More

    Everything on this vehicle

    Complete bulb size guide and replacement tips for the 10th generation Honda Accord.

    Working on this 2019 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Maintaining the lighting on your 2019 Honda Accord (10th Generation) is crucial for both safety and passing state inspections. The 10th generation Accord brought significant updates to Honda's lighting systems, introducing standard LED low beams across all trims, which changes how owners approach bulb replacement compared to previous generations.

    Whether you are looking to upgrade your halogen high beams to LEDs or simply need to replace a burnt-out turn signal, this guide provides all the factory bulb sizes and replacement insights you need.

    Quick Reference: 2019 Honda Accord Bulb Sizes

    Below is a comprehensive chart detailing the bulb sizes and types for the 2019 Honda Accord. Note that your specific trim (e.g., LX, Sport, EX, EX-L, Touring) determines whether some bulbs are replaceable or integrated LED assemblies.

    LocationBulb SizeType
    Low Beam HeadlightIntegrated LEDLED (All trims - non-replaceable)
    High Beam HeadlightH9 (Halogen trims) / Integrated LED (Touring)Halogen / LED
    Fog LightH8 (if equipped) / Integrated LED (Sport+)Halogen / LED
    Daytime Running Light (DRL)Integrated LEDLED
    Front Turn Signal1157NA / 7443NAHalogen (Incandescent)
    Rear Turn Signal7440Halogen (Incandescent)
    Brake Light / Tail LightIntegrated LEDLED
    Reverse / Backup Light7440Halogen (Incandescent)
    License Plate Light194 / W5WHalogen (Incandescent)
    Side Marker (Front/Rear)Integrated LEDLED
    Map Light168 / 194Halogen (Incandescent)
    Dome LightDE3175 (Festoon)Halogen (Incandescent)

    Note: For locations marked "Integrated LED", there is no individual bulb to replace. If it fails, the entire housing/module must be replaced.

    LED vs Halogen Upgrade Considerations

    The 2019 Accord features a modern electrical system that heavily integrates LED technology. While low beams are LED from the factory on all trims, LX, Sport, EX, and EX-L models still use halogen H9 bulbs for their high beams and incandescent bulbs for turn signals and interior lighting.

    If you are planning to upgrade these remaining halogen bulbs to LED, keep the following in mind:

    • CANBUS Systems and Hyper-Flashing: If you upgrade your front or rear turn signals (1157NA/7440) to LED, you will likely experience "hyper-flashing" (the blinker flashing rapidly). You will need to purchase LED bulbs with built-in load resistors or install inline resistors to mimic the electrical resistance of the factory incandescent bulbs.
    • High Beam Upgrades (H9): Upgrading your H9 halogen high beams to LED requires a bulb with a compact heatsink. The Accord’s headlight housing has limited clearance behind the dust cap. Make sure the LED bulb you choose allows the factory dust cover to seal completely to prevent moisture buildup inside the lens.
    • Interior LED Conversions: Swapping the map (194) and dome (DE3175) lights to LED is a highly popular and easy upgrade. They do not typically require CANBUS adapters and offer a much cleaner, brighter white light compared to the dim, yellowish factory halogens.

    How to Replace Each Bulb

    Here are a few professional tips for tackling bulb replacements on your 10th Gen Accord:

    • High Beams (H9): Accessing the high beam bulbs is done directly from under the hood. For the passenger side, you may need to unclip and slightly move the windshield washer fluid neck. Simply twist the bulb counterclockwise to remove it. Avoid touching the glass of the new halogen bulb with your bare fingers, as oils can cause premature failure.
    • Front Turn Signals (1157NA/7443NA): These are located slightly below the main headlight assembly. You can access them by turning the steering wheel all the way to one side, removing the plastic clips holding the inner fender liner, and reaching behind the bumper.
    • Rear Turn Signals and Reverse Lights (7440): Open the trunk and pull back the trunk liner behind the tail lights. You will see the plastic sockets for the turn signal and reverse light. Twist counterclockwise to remove them, pull the old bulb straight out, and push the new one in.
    • Interior Map & Dome Lights: Use a plastic trim removal tool (never a metal flathead screwdriver, which will damage the plastic) to gently pry off the clear plastic covers. Pull the wedge or festoon bulbs out and snap the new ones into place.

    Common Lighting Issues for this Generation

    The 2019 Honda Accord is generally very reliable, but there are a few lighting-specific quirks to watch out for:

    1. Integrated LED Failures: Because the low beams and DRLs are integrated into the headlight assembly, a failure means replacing the entire multi-hundred-dollar housing. Fortunately, these LEDs are designed to last the life of the vehicle, but minor front-end collisions can make for an expensive repair.
    2. Moisture in Headlights: Some owners report condensation inside the headlight housing. If you have recently changed your high beam bulbs, ensure the dust caps are seated perfectly flat and tight.
    3. Rodent Damage: The Accord’s soy-based wiring insulation can sometimes attract rodents, which tend to chew through the easily accessible headlight and fog light wiring harnesses.

    If you are dealing with a complex electrical issue or need to replace a full integrated LED housing, it is best to leave it to the professionals. Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2019 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-27.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email